Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

This article presents a study on the tensile properties of knitted fabrics commonly employed in polymeric matrix textile composites. The key mechanical parameters investigated include stress (Pa), strain, Young's modulus (Pa), and work of rupture (J). The knitted fabrics were developed using the Cixing Knitting System software and subsequently manufactured using a double jersey (electronic) flat knitting machine. The primary objective of this research was to explore the impact of various factors on the mechanical behavior of these knitted fabrics. The factors studied were wale and course directions, float stitch density, loop length (cm), and the type of synthetic knitting yarns used (100% polyester and 100% polyamide) along with different combinations of knitting yarns (100% cotton and 67% polyester/33% cotton hybrid). The adopted ASTM D 5034 standard, Response Surface Methodology (RSM), and Analysis of Variance (ANOVA) were employed to evaluate the mechanical performance of these fabric structures. The findings of the study revealed that the statistical adjustment of the data set for stress, strain, Young's modulus, and work of rupture in knitted fabric structures significantly reduced the standard deviations for mechanical responses. This information holds particular significance as it pertains to the frequent use of these knitted fabric structures as reinforcement in textile-reinforced composite materials. Overall, this study sheds light on the mechanical behavior in structures of knitted fabrics used in polymeric matrix composites, providing valuable insights for the design and optimization of advanced textile-based materials