Add to ORKGWe report on the development of millimeter-wave, lumped-element reflectionless filters using an advanced thin-film fabrication process. Based on previously demonstrated circuit topologies capable of achieving 50{\Omega} impedance match at all frequencies, these circuits have been implemented at higher frequencies than ever before by leveraging a thin-film process with better than 2 {\mu}m feature size and integrated elements such as SiN Metal-Insulator-Metal (MIM) capacitors, bridges, and TaN Thin-Film Resistors (TFRs).Comment: 6 pages, 7 figure, to be submitte
This paper presents a fifth-order W-band waveguide bandpass filter with a Chebyshev response, operat...
New methods were investigated of using optical interference coatings to produce bandpass filters for...
This paper presents the fabrication processes for micromachined millimetre-wave devices, on two diff...
Recent developments in micromachining techniques at the University of Michigan have resulted in nove...
ABSTRACT: Recent developments in micromachining techniques at the University of Michigan have result...
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1...
This paper presents the CAD of RF and microwave filters such as shielded single layer thick film low...
The higher frequency limit of communication systems is continually being pushed to reap its rewards...
The goal of the research in this dissertation is to develop techniques for 1) system-on-package inte...
This paper deals with the design and fabrication of edge-coupled band pass filter (BPF) circuit (fif...
Modem fabrication processes offer the microwave and millimetre-wave circuit designers a wide range o...
Ce mémoire est consacré au développement de technologies de filtrage novatrices qui apportent un gai...
Modern wireless communications systems require microwave circuits presenting high performances in or...
Fully integrated low insertion loss micromachined band-pass filters are designed and fabricated on t...
In current electronics technology, important devices are frequency filters. These devices are used i...
This paper presents a fifth-order W-band waveguide bandpass filter with a Chebyshev response, operat...
New methods were investigated of using optical interference coatings to produce bandpass filters for...
This paper presents the fabrication processes for micromachined millimetre-wave devices, on two diff...
Recent developments in micromachining techniques at the University of Michigan have resulted in nove...
ABSTRACT: Recent developments in micromachining techniques at the University of Michigan have result...
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1...
This paper presents the CAD of RF and microwave filters such as shielded single layer thick film low...
The higher frequency limit of communication systems is continually being pushed to reap its rewards...
The goal of the research in this dissertation is to develop techniques for 1) system-on-package inte...
This paper deals with the design and fabrication of edge-coupled band pass filter (BPF) circuit (fif...
Modem fabrication processes offer the microwave and millimetre-wave circuit designers a wide range o...
Ce mémoire est consacré au développement de technologies de filtrage novatrices qui apportent un gai...
Modern wireless communications systems require microwave circuits presenting high performances in or...
Fully integrated low insertion loss micromachined band-pass filters are designed and fabricated on t...
In current electronics technology, important devices are frequency filters. These devices are used i...
This paper presents a fifth-order W-band waveguide bandpass filter with a Chebyshev response, operat...
New methods were investigated of using optical interference coatings to produce bandpass filters for...
This paper presents the fabrication processes for micromachined millimetre-wave devices, on two diff...