Vorrichtung zur Messung der Oberflaechenspannung von Fluessigkeiten

The appliance determines the time taken for drops of liquid forced through the needle (4) of a syringe to drop off as a measure of the surface tension. The liquid is fed to the syringe (2) through a feed pipe. A drive system (7,8) controlled by a control system (9) with stored programmes forces a defined volumetric flow through the needle into a measurement cell (5). The measurement cell is fitted with a photoelectric sensor to measure the piston speed and the dwell duration of drops on the needle from which the surface tension is measured. USE - With process baths, e.g. for monitoring the concentration of cleaning agents in aqueous cleaning baths, of residual surfactants in rinsing baths of cleansing plants , of wetting agents in galvanising baths, of cooling lubricants, of surface active substances in photographic baths and the concentration or detection of surface active substances in waste water, water treatment plants, etc ADVANTAGE - Can provide continuous or automatic monitoring with wide application particularly with process bath