Results of the comprehensive characterisation of electro-exploded aluminum nanopowders, passivated with the non-inert reagents: oleic acid (C17H33COOH) and stearic acid (C17H35COOH), which were suspended in kerosene and ethanol, amorphous boron, nickel, fluoropolymer and Al2O3 (for a comparison), are discussed. Aluminum nanopowders with a protecting surface show increased stability towards oxidation in air and in water during the storage period. On the basis of the experimental results, a diagram of the formation and stabilization of the coatings is proposed
Received: 28.04.22. Revised: 09.05.22. Accepted: 09.05.22. Available online: 12.05.22.The authors ar...
Aluminum nanoparticles synthesized by titanium (IV) isopropoxide-initiated decomposition of alane ha...
Aluminum nanoparticles have been a subject of active investigation in recent years because of their ...
Results of DTA-TG investigation and chemical analysis of electro-exploded aluminum nanopowders, pass...
Results of DTA-TG-investigations and chemical analysis of electro-exploded aluminum nanopowders, coa...
Aluminum nanopowder (nAl) obtained by electrical explosion of wires and passivated/coated with hydro...
The effect of the method of aluminum nanopowder production on the aluminum products with water react...
Al nanopowders (ANP) produced by plasma electrical explosion method possess an increased reactivity ...
Aluminum oxide colloids were produced by electrical explosion of wires in liquids process. The shape...
International audienceSynthesis of aluminium-containing nanoparticles (NPs) by electrical discharges...
The demand for large scale manufacture of nanoaluminum for use in propellant applications has motiva...
The wet-chemical synthesis of aluminum nanoparticles was investigated systematically by using dimeth...
Passivated aluminum nanoparticles are surface functionalized to elucidate their sensitivity against ...
The chemical and physical mechanisms for the formation of passivation coatings on active metal nanop...
The paper is aimed at studying the impact of initial conditions of electrical explosion of wires on ...
Received: 28.04.22. Revised: 09.05.22. Accepted: 09.05.22. Available online: 12.05.22.The authors ar...
Aluminum nanoparticles synthesized by titanium (IV) isopropoxide-initiated decomposition of alane ha...
Aluminum nanoparticles have been a subject of active investigation in recent years because of their ...
Results of DTA-TG investigation and chemical analysis of electro-exploded aluminum nanopowders, pass...
Results of DTA-TG-investigations and chemical analysis of electro-exploded aluminum nanopowders, coa...
Aluminum nanopowder (nAl) obtained by electrical explosion of wires and passivated/coated with hydro...
The effect of the method of aluminum nanopowder production on the aluminum products with water react...
Al nanopowders (ANP) produced by plasma electrical explosion method possess an increased reactivity ...
Aluminum oxide colloids were produced by electrical explosion of wires in liquids process. The shape...
International audienceSynthesis of aluminium-containing nanoparticles (NPs) by electrical discharges...
The demand for large scale manufacture of nanoaluminum for use in propellant applications has motiva...
The wet-chemical synthesis of aluminum nanoparticles was investigated systematically by using dimeth...
Passivated aluminum nanoparticles are surface functionalized to elucidate their sensitivity against ...
The chemical and physical mechanisms for the formation of passivation coatings on active metal nanop...
The paper is aimed at studying the impact of initial conditions of electrical explosion of wires on ...
Received: 28.04.22. Revised: 09.05.22. Accepted: 09.05.22. Available online: 12.05.22.The authors ar...
Aluminum nanoparticles synthesized by titanium (IV) isopropoxide-initiated decomposition of alane ha...
Aluminum nanoparticles have been a subject of active investigation in recent years because of their ...