Pt/ ZrO2-electrodes are used as sensitive layers in oxygen sensors. The low polarization resistances of the electrode are needed for good sensing properties. Barbucci et al. showed that the polarization resistance and the activation energy of the cermet electrode depend on the Pt content [1]. The aim of this work is to optimize the electrode microstructure to minimize the losses
The polarization resistance (Rp) of the n = 3 Ruddlesden-Popper phases LnSr3Fe1.5Co1.5O10−δ with Ln ...
The polarity of the resistive switching (RS) characteristic of metal-oxide-metal devices from atomic...
The influence of variations in the pH and the pCO2 of the medium surrounding an oxygen electrode on ...
The electrode behavior of Pt-sputtered and PT-gauze electrodes on ZrO2-Y2O3, Bi2O3-Er2O3, and CeO2-G...
The nature of Pt electrodes was studied in the temperature ange of 745~176 under O2-N2 gas mixtures....
AbstractThe electrochemical polarization resistance of the oxygen exchange reaction on yttria stabil...
AbstractModel-type sputter deposited platinum microelectrodes with different grain sizes were invest...
The response time (tr) after a step change in oxygen partial pressure was investigated for some soli...
International audienceIn an attempt to explain the electrochemical effects observed on an original p...
Zirconia-based limiting current oxygen sensor gains considerable attention, due to its high-performa...
The direct current-voltage characteristics of symmetrical cells Pt, O2(I), IZr0.s5Ca0,15Ol.s51Pt, O2...
The concentration or the partial pressure of oxygen in an environment can be determined using differ...
New galvanic cell designs, incorporating one or two buffer electrodes, are developed to minimize the...
An equivalent electrical circuit that describes the electrode processes on different electrolytes, u...
Thin ZrO2 films and ZrO2/TiO2 bilayers grown by atomic layer deposition (ALD) are integrated into me...
The polarization resistance (Rp) of the n = 3 Ruddlesden-Popper phases LnSr3Fe1.5Co1.5O10−δ with Ln ...
The polarity of the resistive switching (RS) characteristic of metal-oxide-metal devices from atomic...
The influence of variations in the pH and the pCO2 of the medium surrounding an oxygen electrode on ...
The electrode behavior of Pt-sputtered and PT-gauze electrodes on ZrO2-Y2O3, Bi2O3-Er2O3, and CeO2-G...
The nature of Pt electrodes was studied in the temperature ange of 745~176 under O2-N2 gas mixtures....
AbstractThe electrochemical polarization resistance of the oxygen exchange reaction on yttria stabil...
AbstractModel-type sputter deposited platinum microelectrodes with different grain sizes were invest...
The response time (tr) after a step change in oxygen partial pressure was investigated for some soli...
International audienceIn an attempt to explain the electrochemical effects observed on an original p...
Zirconia-based limiting current oxygen sensor gains considerable attention, due to its high-performa...
The direct current-voltage characteristics of symmetrical cells Pt, O2(I), IZr0.s5Ca0,15Ol.s51Pt, O2...
The concentration or the partial pressure of oxygen in an environment can be determined using differ...
New galvanic cell designs, incorporating one or two buffer electrodes, are developed to minimize the...
An equivalent electrical circuit that describes the electrode processes on different electrolytes, u...
Thin ZrO2 films and ZrO2/TiO2 bilayers grown by atomic layer deposition (ALD) are integrated into me...
The polarization resistance (Rp) of the n = 3 Ruddlesden-Popper phases LnSr3Fe1.5Co1.5O10−δ with Ln ...
The polarity of the resistive switching (RS) characteristic of metal-oxide-metal devices from atomic...
The influence of variations in the pH and the pCO2 of the medium surrounding an oxygen electrode on ...