Wideband, High-Gain, and Compact Four-Port MIMO Antenna for Future 5G Devices Operating over Ka-Band Spectrum

In this article, the compact, ultra-wideband and high-gain MIMO antenna is presented for future 5G devices operating over 28 GHz and 38 GHz. The presented antenna is designed over substrate material Roger RT/Duroid 6002 with a thickness of 1.52 mm. The suggested design has dimensions of 15 mm × 10 mm and consists of stubs with loaded rectangular patch. The various stubs are loaded to antenna to improve impedance bandwidth and obtain ultra-wideband. The resultant antenna operates over a broadband of 26.5–43.7 GHz, with a peak value of gain \u3e8 dBi. A four-port MIMO configuration is achieved to present the proposed antenna for future high data rate devices. The MIMO antenna offers isolation \u3c−30 dB with ECC of \u3c0.0001. The antenna offers good results in terms of gain, radiation efficiency, envelop correlation coefficient (ECC), mean effective gain (MEG), diversity gain (DG), channel capacity loss (CCL), and isolation. The antenna hardware prototype is fabricated to validate the performance of the suggested design of the antenna achieved from software tools, and good correlation between measured and simulated results is observed. Moreover, the proposed work performance is also differentiated with literature work, which verifies that the suggested work is a potential applicant for future 5G compact devices operating over wideband and high gain