We demonstrate the fabrication of shadow mask (SM) patterned as well as nanoimprint lithography (NIL) patterned organic transistors and integrated complementary organic inverters (ICOIs). As active layers pentacene (p-type) and either PTCDI-C13H27 or F16CuPc (n-type) were used. The SM-patterned ICOIs with a staggered bottom gate configuration, a nanocomposite dielectric and both active layer combinations (pentacene/PTCDI C13H27, pentacene/F16CuPc) exhibited high performance (3 V operation voltage; gain around 60; high level 3 V; low level 5 mV; noise margin 0.9 V). Flexible ICOIs with transistor channel lengths of 900 nm were successfully fabricated by NIL, using a benzocyclobutene derivative as dielectric. Because of the process inherent c...
Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacen...
The fabrication of 60-nm metal-oxide-semiconduictor field-effect transistors was carried out using n...
A multistep imprinting process is presented for the fabrication of a bottom-contact, bottom-gate thi...
This thesis describes the development of a process flow to allow the fabrication of organic field ef...
We have developed a method for integrating n- and p-type organic thin-film transistors (OTFTs) on th...
Recent development of solution processable organic semiconductors delineates the emergence of a new ...
A nanoimprinting process that enables fabrication of self-aligned p- and n-type organic thin film tr...
Organic complementary inverters and ring oscillators are fabricated using a unique combination of in...
A stencil lithography technique has been developed to fabricate organic-material-based electronic de...
We report on low-voltage inverters with two pentacene-based thin-film transistors (TFTs), one of whi...
Organic complementary inverters and ring oscillators are fabricated using a unique combination of in...
The demonstration of the complementary integrated circuit using printing processes is indispensable ...
Complementary organic inverters were fabricated by inkjet patterning of both the metal contacts and ...
Many applications that rely on organic electronic circuits still suffer from the limited switching s...
Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacen...
Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacen...
The fabrication of 60-nm metal-oxide-semiconduictor field-effect transistors was carried out using n...
A multistep imprinting process is presented for the fabrication of a bottom-contact, bottom-gate thi...
This thesis describes the development of a process flow to allow the fabrication of organic field ef...
We have developed a method for integrating n- and p-type organic thin-film transistors (OTFTs) on th...
Recent development of solution processable organic semiconductors delineates the emergence of a new ...
A nanoimprinting process that enables fabrication of self-aligned p- and n-type organic thin film tr...
Organic complementary inverters and ring oscillators are fabricated using a unique combination of in...
A stencil lithography technique has been developed to fabricate organic-material-based electronic de...
We report on low-voltage inverters with two pentacene-based thin-film transistors (TFTs), one of whi...
Organic complementary inverters and ring oscillators are fabricated using a unique combination of in...
The demonstration of the complementary integrated circuit using printing processes is indispensable ...
Complementary organic inverters were fabricated by inkjet patterning of both the metal contacts and ...
Many applications that rely on organic electronic circuits still suffer from the limited switching s...
Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacen...
Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacen...
The fabrication of 60-nm metal-oxide-semiconduictor field-effect transistors was carried out using n...
A multistep imprinting process is presented for the fabrication of a bottom-contact, bottom-gate thi...