Impact of different shapes and types of mixers on sludge dewaterability

The most significant operational cost in a treatment plant is related to the dewatering and disposal of sludge. In this research, different shapes of mixers (radial, axial, wheel, three-blade and magnetic) have been tested to assess their influence on sludge dewaterability testing. As well as the shape of mixers, different rapid mixing velocities, rapid mixing times and coagulants also have been used as test parameters. The capillary suction time (CST) test apparatus was used as a rapid measure to assess sludge dewaterability. Findings indicate that the use of magnetic stirrers leads to the lowest sludge dewaterability properties tested using the CST. The magnetic stirrer produced greater vortex and turbulence compared with other types of mixers, so rapid contact between the coagulant and the water occurred. The use of the other mixers produced similar results. However, the application of different coagulants results differently regarding the sludge dewaterability, when using different rapid mixing velocities. Different rapid mixing times did not lead to differences in the CST. During rapid mixing, Moringa oleifera produced the highest CST values followed by alum and ferric. This is likely due to the difference in sludge volume that is produced by each coagulant. Only M. oleifera produced contaminant agglomerates. In comparison, alum and ferric produced contaminant agglomerates and coagulant hydrolysis products