Over the past few years increased quantities of construction waste from high-rise buildings have been recycled. However, some types of building material are still not reused as secondary building material or in new products. One such material is autoclaved aerated concrete. This article provides an overview of the state of knowledge on the recycling of autoclaved aerated concrete, and presents the results of a survey conducted concerning German demolition companies' handling of autoclaved aerated concrete waste
AbstractIn recent years the evaluation of U-value for buildings materials has been seen. Since 1st J...
The civil engineering sector accounts for a significant percentage of global material and energy con...
AbstractThe emerging sustainable development movement in the construction industry requires the recy...
Autoclaved aerated concrete (AAC) is an increasingly used building material due to its exceptional t...
Aerated concrete is one of the few constituent parts of demolition rubble for which no valid recycli...
The purpose of these studies is to justify the feasibility of recycling different types of industria...
Construction and demolition waste (C&DW) represents one of the EU’s largest waste streams. According...
Autoclaved aerated concrete (AAC) is a widely used building material for masonry units, prefabricate...
Autoclaved aerated concrete (AAC) is a lightweight cellular concrete that has been used for more tha...
Autoclaved aerated concrete (AAC) is a lightweight cellular concrete. Recycling AAC in concrete or u...
The building explosion during the years 1945-1960 will inevitably lead to increased demolition in th...
Currently, natural resources are consumed at an alarming rate than their production (United Nations ...
AbstractThis experimental study aimed to design an autoclaved aerated concrete (AAC) with different ...
Abstract. The traditional bricks are the main building materials that are used extensively in the co...
The building sector is responsible for the introduction of about 40% of the waste in the environment...
AbstractIn recent years the evaluation of U-value for buildings materials has been seen. Since 1st J...
The civil engineering sector accounts for a significant percentage of global material and energy con...
AbstractThe emerging sustainable development movement in the construction industry requires the recy...
Autoclaved aerated concrete (AAC) is an increasingly used building material due to its exceptional t...
Aerated concrete is one of the few constituent parts of demolition rubble for which no valid recycli...
The purpose of these studies is to justify the feasibility of recycling different types of industria...
Construction and demolition waste (C&DW) represents one of the EU’s largest waste streams. According...
Autoclaved aerated concrete (AAC) is a widely used building material for masonry units, prefabricate...
Autoclaved aerated concrete (AAC) is a lightweight cellular concrete that has been used for more tha...
Autoclaved aerated concrete (AAC) is a lightweight cellular concrete. Recycling AAC in concrete or u...
The building explosion during the years 1945-1960 will inevitably lead to increased demolition in th...
Currently, natural resources are consumed at an alarming rate than their production (United Nations ...
AbstractThis experimental study aimed to design an autoclaved aerated concrete (AAC) with different ...
Abstract. The traditional bricks are the main building materials that are used extensively in the co...
The building sector is responsible for the introduction of about 40% of the waste in the environment...
AbstractIn recent years the evaluation of U-value for buildings materials has been seen. Since 1st J...
The civil engineering sector accounts for a significant percentage of global material and energy con...
AbstractThe emerging sustainable development movement in the construction industry requires the recy...