Four industrial-scale n-type Czochralski silicon crystals were grown with different impurity contents, i.e. metallics, phosphorus and oxygen. Horizontal slices were obtained from the top and middle of the crystals and were characterized in terms of lifetime and both defect and impurity distribution. The slabs characterization was performed both under as-grown conditions and after 2-step oxidation. Solar cells were fabricated from neighboring wafers with n-PASHA process and the overall efficiency determined. The crystal grown under low oxygen incorporation conditions has shown higher average as-grown lifetimes compared to the other crystals. The addition of lower phosphorus concentration to the melt resulted in an improvement of the lifetime...
The main object was to investigate the effect of donors, thermal donors and defects on the lifetime ...
The impact of the three main process steps during p-type solar cell processing, namely phosphorus di...
This work was motivated by the large impact of the electrical material quality on the performance of...
The focus of this master's thesis has been the formation of oxygen-related defects in the last 10 cm...
The present work aims at the analysis and technological reduction of the metastable defect responsib...
Light-induced degradation (LID) due to boron-oxygen complex formation seriously diminishes the minor...
The capital expense (capex) of conventional crystal growth methods is a barrier to sustainable growt...
As new solar cell architectures are developed with superior surface passivation, the boron-oxygen de...
Only recently, methods for quality control of multicrystalline silicon wafers have been published, w...
Defect-impurity interactions in high performance multicrystalline silicon The global average and co...
This paper emphasizes that the furnace pressure, crucible rotation, and pulling rate have important ...
Photovoltaic solar cells based on crystalline silicon represent more than 90% of the worldwide photo...
AbstractThe capital expense (capex) of conventional crystal growth methods is a barrier to sustainab...
The presence of metal impurities and their interactions with structural defects (e.g., dislocations)...
The carrier-induced lifetime degradation observed in boron-doped Czochralski silicon (Cz-Si) has its...
The main object was to investigate the effect of donors, thermal donors and defects on the lifetime ...
The impact of the three main process steps during p-type solar cell processing, namely phosphorus di...
This work was motivated by the large impact of the electrical material quality on the performance of...
The focus of this master's thesis has been the formation of oxygen-related defects in the last 10 cm...
The present work aims at the analysis and technological reduction of the metastable defect responsib...
Light-induced degradation (LID) due to boron-oxygen complex formation seriously diminishes the minor...
The capital expense (capex) of conventional crystal growth methods is a barrier to sustainable growt...
As new solar cell architectures are developed with superior surface passivation, the boron-oxygen de...
Only recently, methods for quality control of multicrystalline silicon wafers have been published, w...
Defect-impurity interactions in high performance multicrystalline silicon The global average and co...
This paper emphasizes that the furnace pressure, crucible rotation, and pulling rate have important ...
Photovoltaic solar cells based on crystalline silicon represent more than 90% of the worldwide photo...
AbstractThe capital expense (capex) of conventional crystal growth methods is a barrier to sustainab...
The presence of metal impurities and their interactions with structural defects (e.g., dislocations)...
The carrier-induced lifetime degradation observed in boron-doped Czochralski silicon (Cz-Si) has its...
The main object was to investigate the effect of donors, thermal donors and defects on the lifetime ...
The impact of the three main process steps during p-type solar cell processing, namely phosphorus di...
This work was motivated by the large impact of the electrical material quality on the performance of...