Laser Technologies for Applications in Quantum Information Science

Scientific progress in experimental physics is inevitably dependent on continuing advances in the underlying technologies. Laser technologies enable controlled coherent and dissipative atom-light interactions and micro-optical technologies allow for the implementation of versatile optical systems not accessible with standard optics. This thesis reports on important advances in both technologies with targeted applications ranging from Rydberg-state mediated quantum simulation and computation with individual atoms in arrays of optical tweezers to high-resolution spectroscopy of highly-charged ions. A wide range of advances in laser technologies are reported: The long-term stability and maintainability of external-cavity diode laser systems is improved significantly by introducing a mechanically adjustable lens mount. Tapered-amplifier modules based on a similar lens mount are developed. The diode laser systems are complemented by digital controllers for laser frequency and intensity stabilisation. The controllers offer a bandwidth of up to 1.25 MHz and a noise performance set by the commercial STEMlab platform. In addition, shot-noise limited photodetectors optimised for intensity stabilisation and Pound-Drever-Hall frequency stabilisation as well as a fiber based detector for beat notes in the MHz-regime are developed. The capabilities of the presented techniques are demonstrated by analysing the performance of a laser system used for laser cooling of Rb85 at a wavelength of 780 nm. A reference laser system is stabilised to a spectroscopic reference provided by modulation transfer spectroscopy. This spectroscopy scheme is analysed finding optimal operation at high modulation indices. A suitable signal is generated with a compact and cost-efficient module. A scheme for laser offset-frequency stabilisation based on an optical phase-locked loop is realised. All frequency locks derived from the reference laser system offer a Lorentzian linewidth of 60 kHz (FWHM) in combination with a long-term stability of 130 kHz peak-to-peak within 10 days. Intensity stabilisation based on acousto-optic modulators in combination with the digital controller allows for real-time intensity control on microsecond time scales complemented by a sample and hold feature with a response time of 150 ns. High demands on the spectral properties of the laser systems are put forward for the coherent excitation of quantum states. In this thesis, the performance of active frequency stabilisation is enhanced by introducing a novel current modulation technique for diode lasers. A flat response from DC to 100 MHz and a phase lag below 90° up to 25 MHz are achieved extending the bandwidth available for laserfrequency stabilisation. Applying this technique in combination with a fast proportional-derivative controller, two laser fields with a relative phase noise of 42 mrad for driving rubidium ground state transitions are realised. A laser system for coherent Rydberg excitation via a two-photon scheme provides light at 780 nm and at 480 nm via frequency-doubling from 960 nm. An output power of 0.6 W at 480 nm from a single-mode optical fiber is obtained . The frequencies of both laser systems are stabilised to a high-finesse reference cavity resulting in a linewidth of 1.02 kHz (FWHM) at 960 nm. Numerical simulations quantify the effect of the finite linewidth on the coherence of Rydberg Rabi-oscillations. A laser system similar to the 480 nm Rydberg system is developed for spectroscopy on highly charged bismuth. Advanced optical technologies are also at the heart of the micro-optical generation of tweezer arrays that offer unprecedented scalability of the system size. By using an optimised lens system in combination with an automatic evaluation routine, a tweezer array with several thousand sites and trap waists below 1 μm is demonstrated. A similar performance is achieved with a microlens array produced in an additive manufacturing process. The microlens design is optimised for the manufacturing process. Furthermore, scattering rates in dipole traps due to suppressed resonant light are analysed proving the feasibility of dipole trap generation using tapered amplifier systems