Two short-term (two and nine months) retrieved zirconia-toughened alumina (ZTA) femoral heads and nine pristine femoral heads from the same manufacturer have been investigated with respect to their surface stability by means of confocal Raman spectroscopy. Quantitative estimations of monoclinic volume fraction have been carried out in both non-wear and main wear zones of the retrieved heads, which invariantly showed high volume fractions of monoclinic polymorph. In-depth (sub-surface) profiles, non-destructively collected in the main wear zones with the Raman probe in confocal configuration, indeed confirmed that polymorphic transformation was extended down to 100 mu m below the bearing surface of the femoral heads. Acceleration of tetragon...
The objective of this study was to compare the low temperature degradation (LTD) behavior of femoral...
This study was aimed at investigating the effects of the transfer of metallic debris during an in vi...
This study was aimed at investigating the effects of the transfer of metallic debris during an in vi...
Two short-term (two and nine months) retrieved zirconia-toughened alumina (ZTA) femoral heads and ni...
Zirconia femoral heads retrieved from patients after different implantation periods (up to 13 years)...
Biolox® delta has been widely used in joint replacements thanks to its high strength and wear resist...
A clear discrepancy between predicted in vitro and actual in vivo surface phase stability of BIOLOX®...
International audienceRecent studies on zirconia-toughened alumina (ZTA) evidenced that in vivo aged...
Although metal transfer (MTR) has been observed in total hip replacement, little is known about its ...
The purpose of this work is to establish a protocol, which combines CAD modeling to non-destructive ...
Although metal transfer (MTR) has been observed in total hip replacement, little is known about its ...
none4noSince the introduction of ceramic-on-ceramic couplings in total hip arthroplasty, continuous ...
Zirconia in Zirconia toughened alumina ceramic hip replacements exists in an unstable state and can ...
Wear studies on hip joints have been mainly focused on ultra high molecular weight polyethylene (UHM...
The objective of this study was to compare the low temperature degradation (LTD) behavior of femoral...
This study was aimed at investigating the effects of the transfer of metallic debris during an in vi...
This study was aimed at investigating the effects of the transfer of metallic debris during an in vi...
Two short-term (two and nine months) retrieved zirconia-toughened alumina (ZTA) femoral heads and ni...
Zirconia femoral heads retrieved from patients after different implantation periods (up to 13 years)...
Biolox® delta has been widely used in joint replacements thanks to its high strength and wear resist...
A clear discrepancy between predicted in vitro and actual in vivo surface phase stability of BIOLOX®...
International audienceRecent studies on zirconia-toughened alumina (ZTA) evidenced that in vivo aged...
Although metal transfer (MTR) has been observed in total hip replacement, little is known about its ...
The purpose of this work is to establish a protocol, which combines CAD modeling to non-destructive ...
Although metal transfer (MTR) has been observed in total hip replacement, little is known about its ...
none4noSince the introduction of ceramic-on-ceramic couplings in total hip arthroplasty, continuous ...
Zirconia in Zirconia toughened alumina ceramic hip replacements exists in an unstable state and can ...
Wear studies on hip joints have been mainly focused on ultra high molecular weight polyethylene (UHM...
The objective of this study was to compare the low temperature degradation (LTD) behavior of femoral...
This study was aimed at investigating the effects of the transfer of metallic debris during an in vi...
This study was aimed at investigating the effects of the transfer of metallic debris during an in vi...