A non-linear programming model was developed to maximize the economic profit from an anaerobic co-digester. The model consists of a combination of technical and economic equations, linked through the biogas production variable. Five scenarios were simulated. These differed with regard to substrate inlet mass flow rate, organic loading rate and hydraulic retention time. The impact on biogas production was investigated and an economic analysis was undertaken based on the concepts of profitability and Net Present Value. The model results indicate that varying the substrate inlet mass flow rate and organic loading rate could have a positive impact on the profitability of co-digesters in Flanders. This can be achieved either by increasing the in...
Experiments were conducted in a horizontal continuous biodigester constructed of 12" ID PVC pipe of ...
Anaerobic digestion is used to stabilise sewage sludge and produce biogas. Whilst the need to mix d...
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.This...
A non-linear programming model was developed to maximize the economic profit from an anaerobic co-di...
AbstractA non-linear programming model was developed to maximize the economic profit from an anaerob...
Research ArticleThe ability of anaerobic digestion to create value from waste gives it an important ...
The status, recent trends and future perspectives in modelling and optimisation of anaerobic co-dige...
Optimal control of biogas plants is a complex and challenging task due to the nonlinearity of the a...
The impact of Inoculum-to-Substrate (I/S) ratio on the optimization of biogas yield from the co-dige...
In the developed world, anaerobic digestion (AD) is commonly installed on a large scale (over 500 kW...
Anaerobic treatment technology offers great potential towards achieving Sustainable Development Goal...
Anaerobic digestion of farm waste has the potential to revolutionize the agricultural sector. There ...
As worldwide environmental awareness grow, alternative sources of energy have become important to mi...
Despite the advantages of the Anaerobic Digestion (AD) technology for organic waste management, low ...
One of the key concerns of biogas plants is the disposal of comparatively large amounts of digestate...
Experiments were conducted in a horizontal continuous biodigester constructed of 12" ID PVC pipe of ...
Anaerobic digestion is used to stabilise sewage sludge and produce biogas. Whilst the need to mix d...
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.This...
A non-linear programming model was developed to maximize the economic profit from an anaerobic co-di...
AbstractA non-linear programming model was developed to maximize the economic profit from an anaerob...
Research ArticleThe ability of anaerobic digestion to create value from waste gives it an important ...
The status, recent trends and future perspectives in modelling and optimisation of anaerobic co-dige...
Optimal control of biogas plants is a complex and challenging task due to the nonlinearity of the a...
The impact of Inoculum-to-Substrate (I/S) ratio on the optimization of biogas yield from the co-dige...
In the developed world, anaerobic digestion (AD) is commonly installed on a large scale (over 500 kW...
Anaerobic treatment technology offers great potential towards achieving Sustainable Development Goal...
Anaerobic digestion of farm waste has the potential to revolutionize the agricultural sector. There ...
As worldwide environmental awareness grow, alternative sources of energy have become important to mi...
Despite the advantages of the Anaerobic Digestion (AD) technology for organic waste management, low ...
One of the key concerns of biogas plants is the disposal of comparatively large amounts of digestate...
Experiments were conducted in a horizontal continuous biodigester constructed of 12" ID PVC pipe of ...
Anaerobic digestion is used to stabilise sewage sludge and produce biogas. Whilst the need to mix d...
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.This...