A direct comparison of deuterium retention in samples of tungsten and two grades of tungsten-tantalum alloys-W-1% Ta and W-5% Ta, exposed to deuterium plasmas (ion flux similar to 10(24) m(-2) s(-1), ion energy at the biased target similar to 50 eV) at the plasma generator Pilot-PSI was performed using thermal desorption spectroscopy (TDS). No systematic difference in terms of total retention in tungsten and tungsten-tantalum was identified. The measured retention value for each grade did not deviate by more than 24% from the value averaged over the three grades exposed to the same conditions. No additional desorption peaks appeared in the TDS spectra of the W-Ta samples as compared with the W target, indicating that no additional kinds of ...
Thermal desorption spectroscopy (TDS) of W-1% Ta and W-5% Ta alloys exposed to a high-flux deuterium...
Thermal desorption spectroscopy (TDS) of W-1% Ta and W-5% Ta alloys exposed to a high-flux deuterium...
The tungsten “heavy alloy” HPM 1850, a liquid-phase sintered composite material with two weight perc...
A direct comparison of deuterium retention in samples of tungsten and two grades of tungsten-tantalu...
A direct comparison of deuterium retention in samples of tungsten and two grades of tungsten-tantalu...
Samples of tungsten and tungsten-tantalum alloy (with 5 mass per cent of Ta) were exposed to high-fl...
The paper presents the results of an experimental study of deuterium retention in W and W–Ta alloy t...
The paper presents the results of an experimental study of deuterium retention in W and W–Ta alloy t...
The present work reports the results of an experimental study of the depth distribution and fluence ...
We investigated the effect of surface temperature on deuterium retention in self-damaged tungsten ex...
The present work reports the results of an experimental study of the depth distribution and fluence ...
AbstractDeuterium retention was for the first time measured in tungsten samples simultaneously irrad...
The possible mutual influence and synergistic effect between defect production and the presence of h...
Samples of tungsten and tungsten-tantalum alloy (with 5 mass per cent of Ta) were exposed to high-fl...
Samples of tungsten and tungsten-tantalum alloy (with 5 mass per cent of Ta) were exposed to high-fl...
Thermal desorption spectroscopy (TDS) of W-1% Ta and W-5% Ta alloys exposed to a high-flux deuterium...
Thermal desorption spectroscopy (TDS) of W-1% Ta and W-5% Ta alloys exposed to a high-flux deuterium...
The tungsten “heavy alloy” HPM 1850, a liquid-phase sintered composite material with two weight perc...
A direct comparison of deuterium retention in samples of tungsten and two grades of tungsten-tantalu...
A direct comparison of deuterium retention in samples of tungsten and two grades of tungsten-tantalu...
Samples of tungsten and tungsten-tantalum alloy (with 5 mass per cent of Ta) were exposed to high-fl...
The paper presents the results of an experimental study of deuterium retention in W and W–Ta alloy t...
The paper presents the results of an experimental study of deuterium retention in W and W–Ta alloy t...
The present work reports the results of an experimental study of the depth distribution and fluence ...
We investigated the effect of surface temperature on deuterium retention in self-damaged tungsten ex...
The present work reports the results of an experimental study of the depth distribution and fluence ...
AbstractDeuterium retention was for the first time measured in tungsten samples simultaneously irrad...
The possible mutual influence and synergistic effect between defect production and the presence of h...
Samples of tungsten and tungsten-tantalum alloy (with 5 mass per cent of Ta) were exposed to high-fl...
Samples of tungsten and tungsten-tantalum alloy (with 5 mass per cent of Ta) were exposed to high-fl...
Thermal desorption spectroscopy (TDS) of W-1% Ta and W-5% Ta alloys exposed to a high-flux deuterium...
Thermal desorption spectroscopy (TDS) of W-1% Ta and W-5% Ta alloys exposed to a high-flux deuterium...
The tungsten “heavy alloy” HPM 1850, a liquid-phase sintered composite material with two weight perc...