Fe-Mn-Si-Cr-Ni-C samples with deformations from 2 to 20% were investigated using positron annihilation spectroscopy, optical microscopy (OM) and X-ray diffraction (XRD). Both Doppler broadening of the annihilation radiation (DBAR) and positron annihilation lifetime spectroscopy (PALS) measurements were performed. The DBAR experiments, carried out using a slow positron beam, indicate a sudden increase in the defect concentration in between 4 and 6% deformation. This is confirmed by the lifetime measurements. In between 6% and 8% deformation the lineshape parameter significantly changes which coincides with the drastic increase of the concentration of the martensite phase as confirmed by XRD. Positron annihilation spectroscopy indirectly prob...
Results of experimental investigations of uniaxially elongated mono- and polycrystalline samples of ...
Positron annihilation spectroscopy (PAS) has been used to study the annealing behavior of cold rolle...
The positron annihilation technique can provide a sensitive measure of defect density in metals. In ...
Fe-Mn-Si-Cr-Ni-C samples with deformations from 2 to 20% were investigated using positron annihilati...
Fe-Mn-Si-Cr-Ni-C samples with deformations from 2 to 20% were investigated using positron annihilati...
Defects in Fe-Mn-Si-Cr-Ni samples were studied at room temperature. Steel samples were deformed duri...
Defects in Fe-Mn-Si-Cr-Ni samples were studied at room temperature. Steel samples were deformed duri...
Defects in different iron based alloys were studied at room temperature using positron annihilation ...
The influence of the addition of C to the Fe-Mn-Si-Cr-Ni base material is investigated at room tempe...
The influence of the addition of C to the Fe-Mn-Si-Cr-Ni base material is investigated at room tempe...
A set of Fe-Si samples with different Si content, varying from 0 to 7.6 wt.%, was investigated using...
Positron annihilation lifetime (PAL) spectroscopy is used to study the concentration of vacancies, v...
Positron annihilation spectroscopy (PAS) is a powerful, non-destructive technique used to characteri...
Positron annihilation spectroscopy (PAS) is a powerful, non-destructive technique used to characteri...
Angular distributions of the positron annihilation quanta were measured for polycrystalline samples ...
Results of experimental investigations of uniaxially elongated mono- and polycrystalline samples of ...
Positron annihilation spectroscopy (PAS) has been used to study the annealing behavior of cold rolle...
The positron annihilation technique can provide a sensitive measure of defect density in metals. In ...
Fe-Mn-Si-Cr-Ni-C samples with deformations from 2 to 20% were investigated using positron annihilati...
Fe-Mn-Si-Cr-Ni-C samples with deformations from 2 to 20% were investigated using positron annihilati...
Defects in Fe-Mn-Si-Cr-Ni samples were studied at room temperature. Steel samples were deformed duri...
Defects in Fe-Mn-Si-Cr-Ni samples were studied at room temperature. Steel samples were deformed duri...
Defects in different iron based alloys were studied at room temperature using positron annihilation ...
The influence of the addition of C to the Fe-Mn-Si-Cr-Ni base material is investigated at room tempe...
The influence of the addition of C to the Fe-Mn-Si-Cr-Ni base material is investigated at room tempe...
A set of Fe-Si samples with different Si content, varying from 0 to 7.6 wt.%, was investigated using...
Positron annihilation lifetime (PAL) spectroscopy is used to study the concentration of vacancies, v...
Positron annihilation spectroscopy (PAS) is a powerful, non-destructive technique used to characteri...
Positron annihilation spectroscopy (PAS) is a powerful, non-destructive technique used to characteri...
Angular distributions of the positron annihilation quanta were measured for polycrystalline samples ...
Results of experimental investigations of uniaxially elongated mono- and polycrystalline samples of ...
Positron annihilation spectroscopy (PAS) has been used to study the annealing behavior of cold rolle...
The positron annihilation technique can provide a sensitive measure of defect density in metals. In ...