Modelling of long-term loading tests on reinforced concrete beams

During the period 1967-1985 the Magnel Laboratory for Concrete Research participated in an extensive Belgian research campaign with respect to the influence of creep and shrinkage on the long-term behaviour of reinforced and prestressed concrete beams. This research campaign, jointly conducted at several Belgian research institutes, comprised the investigation of concrete and reinforced concrete beams (phase 1), prestressed concrete beams (phase 2) and partially prestressed concrete beams (phase 3). The main aim of the research campaign was the determination of the long-term behaviour subjected to permanent loads, considering the influence of the magnitude of the loads, different reinforcement ratios and/or prestressing degrees and/or different cross-sectional shapes. These results were obtained by a joint collaboration of 4 Belgian research institutes, each focussing on a different reinforcement ratio and reinforcement arrangement. With respect to the reinforced concrete beams (phase 1), at each institute 12 beams were tested in a 4point bending configuration, namely 2 static tests at 28 days and 10 long-term tests with a duration of 2 to 4 years, considering different loading levels. In this contribution some results of the reinforced concrete beams (phase 1) will be documented and analysed, comprising the results obtained on 48 reinforced beam specimens with a length of 3.4 m (span of 2.8 m) and cross-section of 0.28 m x 0.15 m. A cross-sectional calculation tool developed at our department-incorporating the current creep and shrinkage models in standards and guidelines-will be employed in order to investigate the accuracy of the available models with respect to their ability to predict the structural behaviour of the documented reinforced concrete beams