A parallel implementation of the confined-unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

FullSWOF Paral: Comparison of two parallelization strategies (MPI and SKELGIS) on a software designed for hydrology applications∗

January 2013

In this paper, we perform a comparison of two approaches for the parallelization of an existing, fre...

Parallel solution of surface water flow problems on shared and distributed memory multiprocessor computer systems

Editor ITconf (4897861)
Sorokin M.V. (4899787)

February 2018

Parallel solution of surface water flow problems on shared and distributed memory multiprocessor com...

IMPROVING THE PERFORMANCE OF A PARFLOW PROXY APPLICATIONTHROUGH CUDA PARALLELISM

Romero, Matthew
Romero, Matthew

May 2020

As hydrological data becomes more in-depth and is measured at higher resolutions, the need for a fas...

A parallel implementation of the confined-unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

Fischler, Yannic
Kleiner, Thomas
Bischof, Christian
Schmiedel, Jeremie
Sayag, Roiy
Emunds, Raban
Oestreich, Lennart Frederik
Humbert, Angelika

January 2023

This is the first release of CUAS-MPI related to our paper: A parallel implementation of the confine...

A parallel implementation of the confined–unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

Fischler, Yannic
Kleiner, Thomas
Bischof, Christian
Schmiedel, Jeremie
Sayag, Roiy
Emunds, Raban
Oestreich, Lennart Frederik
Humbert, Angelika

September 2023

Abstract. The subglacial hydrological system affects (i) the motion of ice sheets through sliding, (...

Development of a Parallel Geomechanics Code Based on the Message-Passing-Interface (MPI) Approach and Iterative Coupling with a Parallelized Flow and Thermal Simulator for the Analysis of System Behavior in Hydrate-Bearing Geologic Media

Zhang, Jiecheng

January 2022

The Reservoir GeoMechanics Simulator (RGMS), a geomechanics simulator based on the finite element me...

A parallelization scheme to simulate reactive transport in the subsurface environment with OGS#IPhreeqc 5.5.7-3.1.2

W. He
C. Beyer
J. H. Fleckenstein
E. Jang
O. Kolditz
D. Naumov
T. Kalbacher

October 2015

The open-source scientific software packages OpenGeoSys and IPhreeqc have been coupled to set up and...

FullSWOF Paral: Comparison of two parallelization strategies (MPI and SKELGIS) on a software designed for hydrology applications

S. Cordier
H. Coullon
O. Delestre
C. Laguerre
M. H. Le
D. Pierre
G. Sadaka

December 2013

In this paper, we perform a comparison of two approaches for the parallelization of an exi...

A parallel computing strategy for Monte Carlo simulation using groundwater models

Leyva-Suárez, Esther
Herrera, Graciela S.
de la Cruz, Luis M.

September 2015

AbstractIn this paper we present the results of a parallelization strategy to reduce the execution t...

BrAHMs V1.0: A fast, physically-based subglacial hydrology model for continental-scale application.

Kavanagh, Mark (5144369)
Tarasov, Lev (5144372)

April 2018

<p>F90 tarbundle for BraHMs V1.0 and associated basic test/validation setup. Code associated with Ka...

Layered Shallow Water Model in Julia, Implementation on CPU, GPU, and Cluster Hardware, and Performance Tests

Strauss, Robert R

January 2023

Julia implementation of layered shallow-water model on MPAS/TRiSK-like unstructured mesh, for prospe...

A parallel finite element code fon nonlinear leaky aquifer systems.

Pini, Giorgio
Sartoretto, Flavio

January 1999

Developing parallel codes for computing the nonlinear flow in multiaquifer porous systems is an impo...

Quantifying the Performances of the Semi-Distributed Hydrologic Model in Parallel Computing—A Case Study

JungJin Kim
Jae Hyeon Ryu

April 2019

The research features how parallel computing can advance hydrological performances associated with d...

Parallel finite volume computation on general meshes

Vassilevski, Yuri
Terekhov, Kirill
Nikitin, Kirill
Kapyrin, Ivan

January 2020

This book presents a systematic methodology for the development of parallel multi-physics models and...

Parallel Processing Transport Model MT3DMS by Using OpenMP

Linxian Huang

May 2018

Solute transport modeling resolves advection, dispersion, and chemical reactions in groundwater syst...

FullSWOF Paral: Comparison of two parallelization strategies (MPI and SKELGIS) on a software designed for hydrology applications∗

January 2013

In this paper, we perform a comparison of two approaches for the parallelization of an existing, fre...

Parallel solution of surface water flow problems on shared and distributed memory multiprocessor computer systems

Editor ITconf (4897861)
Sorokin M.V. (4899787)

February 2018

Parallel solution of surface water flow problems on shared and distributed memory multiprocessor com...

IMPROVING THE PERFORMANCE OF A PARFLOW PROXY APPLICATIONTHROUGH CUDA PARALLELISM

Romero, Matthew
Romero, Matthew

May 2020

As hydrological data becomes more in-depth and is measured at higher resolutions, the need for a fas...

A parallel implementation of the confined-unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

Fischler, Yannic
Kleiner, Thomas
Bischof, Christian
Schmiedel, Jeremie
Sayag, Roiy
Emunds, Raban
Oestreich, Lennart Frederik
Humbert, Angelika

January 2023

This is the first release of CUAS-MPI related to our paper: A parallel implementation of the confine...

A parallel implementation of the confined–unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

Fischler, Yannic
Kleiner, Thomas
Bischof, Christian
Schmiedel, Jeremie
Sayag, Roiy
Emunds, Raban
Oestreich, Lennart Frederik
Humbert, Angelika

September 2023

Abstract. The subglacial hydrological system affects (i) the motion of ice sheets through sliding, (...

Development of a Parallel Geomechanics Code Based on the Message-Passing-Interface (MPI) Approach and Iterative Coupling with a Parallelized Flow and Thermal Simulator for the Analysis of System Behavior in Hydrate-Bearing Geologic Media

Zhang, Jiecheng

January 2022

The Reservoir GeoMechanics Simulator (RGMS), a geomechanics simulator based on the finite element me...

A parallelization scheme to simulate reactive transport in the subsurface environment with OGS#IPhreeqc 5.5.7-3.1.2

W. He
C. Beyer
J. H. Fleckenstein
E. Jang
O. Kolditz
D. Naumov
T. Kalbacher

October 2015

The open-source scientific software packages OpenGeoSys and IPhreeqc have been coupled to set up and...

FullSWOF Paral: Comparison of two parallelization strategies (MPI and SKELGIS) on a software designed for hydrology applications

S. Cordier
H. Coullon
O. Delestre
C. Laguerre
M. H. Le
D. Pierre
G. Sadaka

December 2013

In this paper, we perform a comparison of two approaches for the parallelization of an exi...

A parallel computing strategy for Monte Carlo simulation using groundwater models

Leyva-Suárez, Esther
Herrera, Graciela S.
de la Cruz, Luis M.

September 2015

AbstractIn this paper we present the results of a parallelization strategy to reduce the execution t...

BrAHMs V1.0: A fast, physically-based subglacial hydrology model for continental-scale application.

Kavanagh, Mark (5144369)
Tarasov, Lev (5144372)

April 2018

<p>F90 tarbundle for BraHMs V1.0 and associated basic test/validation setup. Code associated with Ka...

Layered Shallow Water Model in Julia, Implementation on CPU, GPU, and Cluster Hardware, and Performance Tests

Strauss, Robert R

January 2023

Julia implementation of layered shallow-water model on MPAS/TRiSK-like unstructured mesh, for prospe...

A parallel finite element code fon nonlinear leaky aquifer systems.

Pini, Giorgio
Sartoretto, Flavio

January 1999

Developing parallel codes for computing the nonlinear flow in multiaquifer porous systems is an impo...

Quantifying the Performances of the Semi-Distributed Hydrologic Model in Parallel Computing—A Case Study

JungJin Kim
Jae Hyeon Ryu

April 2019

The research features how parallel computing can advance hydrological performances associated with d...

Parallel finite volume computation on general meshes

Vassilevski, Yuri
Terekhov, Kirill
Nikitin, Kirill
Kapyrin, Ivan

January 2020

This book presents a systematic methodology for the development of parallel multi-physics models and...

Parallel Processing Transport Model MT3DMS by Using OpenMP

Linxian Huang

May 2018

Solute transport modeling resolves advection, dispersion, and chemical reactions in groundwater syst...

FullSWOF Paral: Comparison of two parallelization strategies (MPI and SKELGIS) on a software designed for hydrology applications∗

January 2013

In this paper, we perform a comparison of two approaches for the parallelization of an existing, fre...

Parallel solution of surface water flow problems on shared and distributed memory multiprocessor computer systems

Editor ITconf (4897861)
Sorokin M.V. (4899787)

February 2018

Parallel solution of surface water flow problems on shared and distributed memory multiprocessor com...

IMPROVING THE PERFORMANCE OF A PARFLOW PROXY APPLICATIONTHROUGH CUDA PARALLELISM

Romero, Matthew
Romero, Matthew

May 2020

As hydrological data becomes more in-depth and is measured at higher resolutions, the need for a fas...

A parallel implementation of the confined-unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

Abstract

Extracted data

A parallel implementation of the confined-unconfined aquifer system model for subglacial hydrology: design, verification, and performance analysis (CUAS-MPI v0.1.0)

Abstract

Extracted data

Related items

Related items