This work focuses on adhesive films obtained upon film formation of urethane/acrylic hybrid latex particles. These latexes were prepared by a miniemulsion polymerization to ensure a homogeneous incorporation of the PU inside the particles. Studying the morphology of particles and films showed that the grafting of polyurethane is essential to avoid phase separation at the film scale which is harmful for the macroscopic properties. Two parameters affect the mechanical properties of the films: the polyurethane weight fraction controls the linear viscoelastic properties while the degree of grafting of the PU modifies the maximum deformability of the film by modifying the mesh size of the network. The primary interest of the hybridization is to ...
In this contribution, the results of measurements are presented concerning rheological and mechanica...
236 p.The main goal of this PhD thesis was to establish a link between particle morphology and film ...
Automotive topcoats are constituted of basecoat/clearcoat system or lacquer. Analyses of their outer...
This work focuses on adhesive films obtained upon film formation of urethane/acrylic hybrid latex pa...
Cette thèse a pour objet l étude de films adhésifs obtenus par le séchage de particules de latex hyb...
International audiencePolyurethane (PU)/acrylic hybrid particles with different PU contents were syn...
International audienceUrethane/acrylic hybrid latex particles are prepared by miniemulsion polymeriz...
The objectives of work presented in this thesis are to understand droplet and particle formulation p...
Water-borne polyurethane/acrylic hybrid latexes for their application as pressure-sensitive adhesive...
We studied adhesive and deformation properties of soft polymer films made from nanostructured latex ...
297 p.Typically, the PU/acrylic hybrid nanoparticle dispersions are prepared in multistep procedure,...
The effects of the CTA concentration on polymerization kinetics, polymer microstructure, particle mo...
The morphology and adhesive properties of waterborne films from n-butyl acrylate/methyl methacrylate...
Tackifying resins (TRs) are often added to pressure-sensitive adhesive films to increase their peel ...
328 p.The main goal of this PhD thesis was to establish a link between particle morphology and film ...
In this contribution, the results of measurements are presented concerning rheological and mechanica...
236 p.The main goal of this PhD thesis was to establish a link between particle morphology and film ...
Automotive topcoats are constituted of basecoat/clearcoat system or lacquer. Analyses of their outer...
This work focuses on adhesive films obtained upon film formation of urethane/acrylic hybrid latex pa...
Cette thèse a pour objet l étude de films adhésifs obtenus par le séchage de particules de latex hyb...
International audiencePolyurethane (PU)/acrylic hybrid particles with different PU contents were syn...
International audienceUrethane/acrylic hybrid latex particles are prepared by miniemulsion polymeriz...
The objectives of work presented in this thesis are to understand droplet and particle formulation p...
Water-borne polyurethane/acrylic hybrid latexes for their application as pressure-sensitive adhesive...
We studied adhesive and deformation properties of soft polymer films made from nanostructured latex ...
297 p.Typically, the PU/acrylic hybrid nanoparticle dispersions are prepared in multistep procedure,...
The effects of the CTA concentration on polymerization kinetics, polymer microstructure, particle mo...
The morphology and adhesive properties of waterborne films from n-butyl acrylate/methyl methacrylate...
Tackifying resins (TRs) are often added to pressure-sensitive adhesive films to increase their peel ...
328 p.The main goal of this PhD thesis was to establish a link between particle morphology and film ...
In this contribution, the results of measurements are presented concerning rheological and mechanica...
236 p.The main goal of this PhD thesis was to establish a link between particle morphology and film ...
Automotive topcoats are constituted of basecoat/clearcoat system or lacquer. Analyses of their outer...