Experimental investigation of crack width variation along the concrete cover depth in reinforced concrete specimens with ribbed bars and smooth bars

Crack width variation along the concrete cover depth has been studied from the past for better understanding of the cracking phenomenon in reinforced concrete (RC) structures. Previous studies have highlighted important cracking behaviors like internal cracks. The behavior of ‘slip’ between the reinforcement and concrete and the formation of a nonuniform crack face along the concrete cover depth are still not very clearly understood. An experimental program has been conducted to study the crack width variation along the cover depth in concrete prisms reinforced with a central ribbed bar and smooth bar, by varying the concrete cover depths. Both in specimens with smooth bars (SS) and specimens with ribbed bars (SR), crack width is larger on the concrete surface than at the steel bar surface. The crack width at the reinforcement is considerably larger in the SS than in the SR. In the SR, the crack width increases from the reinforcement along the cover depth bi-linearly, while, in the SS, it increases linearly. For the SR, the aforementioned behavior is due to the occurrence of internal cracks. In the SS, significant slip has been identified at the reinforcement and concrete interface, whereas negligible slip has been observed in the SR. A surface crack width calculation model has been developed, considering both the strain difference and the effect of the nonuniform crack face along the concrete cover depth. Its predictions showed good agreement with the experimental surface crack widths from the conducted study and with the results from the experiments in literature.publishedVersio