The influence of varying thermal treatment conditions on reducing zinc content from a steelmaking and blast furnace sludge

The prospects of processing blast furnace and steelmaking sludge using the Waelz process in a laboratory rotary kiln, is shown. The influence of different processing temperatures, furnace atmosphere and the type of reducing agents on the level of zinc reduction from sludges was analyzed. In general, the blast furnace sludge contains a high portion of iron (approx. 48 wt.%) and can be reused as a charge after satisfactory zinc reduction. It was found that N- atmosphere and a high content of the graphite or coke oven reducing agent in combination with high temperature can reduce the content of Zn in the sludge to 0.08 wt.% at 1200 degrees C for a mixture of steelmaking and blast furnace sludge. A significant reduction in the Zn content to 0.66 wt.% occurs at 1100 degrees C. The content and type of reducing agent plays an important role; graphite has shown a better reducing ability compared to coke oven dust. When nitrogen is used, zinc is reduced even without an additional reducing agent, since the carbon contained in the sludge is made use of for the reduction. In an air atmosphere, without the use of a reducing agent, there was no reduction in the Zn content.Web of Science1211art. no. 196