Transfer-Printed Environmental-Friendly Anisotropic Filter with Laser-Controlled Micropores for Efficient Oil/Water Separation

Water is indispensable for sustaining life on Earth. Oil–water mixtures/or emulsions from industrial waste and other sources are a serious environmental concern for both human beings and aquatic life. Specially treated meshes and textiles with opposing wettability for oil–water separation have been widely reported as a solution to this challenge. Nonetheless, such membranes are hindered by certain drawbacks, including high manufacturing costs, usage of harmful chemicals, and lack of diverse applicability. Here, we report a facile method to fabricate Janus oil–water separation membrane with a controllable pore structure that has a unique directional flux rate. The superhydrophobic (SHB) layer of the membrane is formed by transfer-printing (TP) carbon soot particles onto a polydimethylsiloxane (PDMS)-coated paper surface. Meanwhile, a spin-coated thin layer of chitosan on the other side of the film served as a hydrophilic (SHL) and underwater oleophobic face. A pulsed laser beam is used to produce micropores with conical structures. The separation ability of the membrane for both light oil–water and heavy oil–water mixtures is thoroughly investigated. Moreover, the significance of the pore shape and the size is also elucidated. The flexible Janus membrane showed high thermal stability and ideal (i.e., 99.8%) separation efficiency. The membrane can be produced over a 151 cm2 size range. Besides having flexibility and superior performance, the fabricated membrane is environmentally friendly and economically viable. This work establishes a scalable basis for efficient and low-cost oil/water membranes from non-porous substrates