Metallurgical coke with high strength and low reactivity is used in the ironmaking blast furnace. Replacement of some coking coal with bio-coal was shown to result in lower strength and higher reactivity of produced coke due to introduction of reactive bio-coal carbon and ash components catalyzing the Boudouard reaction, but also due to lowering of the coking coal blend fluidity, which influences coke strength and reactivity negatively. The current study aims to investigate the possibility to counteract negative impact from bio-coal addition on fluidity and coke reactivity by using high-fluidity coking coal and by agglomeration of bio-coal before addition. Original bio-coal and micro-agglomerate of bio-coal was added at 10%, 15% and 20% to ...
Two bituminous coals of different rank and coking characteristics were oxidized at low temperature f...
Rapid growth of the steel industry in coming years will be strongly dependent upon coal. Understandi...
Eight cokes made from coals/blend with different properties (vitrinite mean maximum reflectance = 0....
Metallurgical coke with high strength and low reactivity is used in the ironmaking blast furnace. Re...
Substitution of coal in coking coal blend with bio-coal is a potential way to reduce fossil CO2 emis...
Coke corresponds to 2/3–3/4 of the reducing agents in BF, and by the partial replacement of coking c...
The iron-ore-based blast furnace (BF) process is still the most dominant method for producing metall...
The aim of this research was to investigate the effects of charcoal and Kraft-lignin additions on th...
The steel industry is aiming to reduce CO2 emissions by different means; in the short-term, by repla...
Abstract The aim of this research was to investigate the effects of charcoal and Kraft-lignin additi...
Due to global warming, technologies reducing CO2 emissions in the metallurgical industry are being s...
In recent years, the consequences of global warming have increased the discussion about the climate ...
Coke quality in blast furnace is measured by its resistance to degradation, in its role as a fuel, a...
Steel industries around the world have been trying to improve the blast furnace efficiency in order ...
Abstract Replacement of part of the coal in the coking blend with lignin would be an attractive sol...
Two bituminous coals of different rank and coking characteristics were oxidized at low temperature f...
Rapid growth of the steel industry in coming years will be strongly dependent upon coal. Understandi...
Eight cokes made from coals/blend with different properties (vitrinite mean maximum reflectance = 0....
Metallurgical coke with high strength and low reactivity is used in the ironmaking blast furnace. Re...
Substitution of coal in coking coal blend with bio-coal is a potential way to reduce fossil CO2 emis...
Coke corresponds to 2/3–3/4 of the reducing agents in BF, and by the partial replacement of coking c...
The iron-ore-based blast furnace (BF) process is still the most dominant method for producing metall...
The aim of this research was to investigate the effects of charcoal and Kraft-lignin additions on th...
The steel industry is aiming to reduce CO2 emissions by different means; in the short-term, by repla...
Abstract The aim of this research was to investigate the effects of charcoal and Kraft-lignin additi...
Due to global warming, technologies reducing CO2 emissions in the metallurgical industry are being s...
In recent years, the consequences of global warming have increased the discussion about the climate ...
Coke quality in blast furnace is measured by its resistance to degradation, in its role as a fuel, a...
Steel industries around the world have been trying to improve the blast furnace efficiency in order ...
Abstract Replacement of part of the coal in the coking blend with lignin would be an attractive sol...
Two bituminous coals of different rank and coking characteristics were oxidized at low temperature f...
Rapid growth of the steel industry in coming years will be strongly dependent upon coal. Understandi...
Eight cokes made from coals/blend with different properties (vitrinite mean maximum reflectance = 0....