Effect of Activating Solution Modulus on the Synthesis of Sustainable Geopolymer Binders Using Spent Oil Bleaching Earths as Precursor

The valorization of spent oil bleaching earths (SOBE) is crucial for the protection of the environment and the reuse of resources. In this research, alkali-activated binders were manufactured at room temperature using SOBE as a precursor by varying the mass ratio between the activating solutions of sodium silicate (Na2SiO3) and 6 M sodium hydroxide (NaOH) (activating solution modulus) (Na2SiO3/NaOH ratio = 1/1; 1/2; 1/3; 1/4) to investigate the influence on the technological properties of the materials. This process intends to evaluate the potential of SOBE, heat-treated at 550 degrees C (1 h), as a precursor of the reaction (source of aluminosilicates). Samples produced with higher amounts of sodium silicate developed a denser structure, with lower porosity and a higher amount of geopolymer gel. Maximum flexural (8.35 MPa) and compressive (28.4 MPa) strengths of samples cured at room temperature for 28 days were obtained with a Na2SiO3/NaOH mass ratio of 1/1. The study demonstrates that SOBE waste can be used as a precursor in the manufacture of geopolymer binders that show a good compromise between physical, mechanical and thermally insulating characteristics