Controlling soft robots is a significant challenge due to the nonlinear elastic nature of the soft materials that conform their structure. This paper studies the identification and control problems of a novel two-degrees-of-freedom, tendon-actuated, soft robotic arm. A decoupled identification approach is presented; later, a fractional order control strategy is proposed and tested experimentally, in comparison with PI solutions. The simulation and experimental results show the goodness of the modeling and control approaches discussed
Soft robotics is becoming an emerging solution to many of the problems in robotics, such as weight, ...
Tip control is a current open issue in soft robotics; therefore, it has received a good amount of at...
Tip control is a current open issue in soft robotics; therefore, it has received a good amount of at...
This article belongs to the Special Issue Fractional Order Control Techniques for Robots.Controlling...
The purpose of this work is to present a novel control approach for a tendon driven soft robotic sy...
This paper has been presented at 26th International Conference on Robotics in Alpe-Adria-Danube Regi...
The purpose of this work is to present a novel control approach for a tendon-driven elastic continuu...
International audienceThis paper presents a computationally efficient method to model and simulate s...
Continuum soft robots are made up of soft material components (referred to as continuum), rigid comp...
With the accelerated development of robot technologies, optimal control becomes one of the central t...
We present a general strategy for the modeling and simulation-based control of soft robots. Although...
We present a model-based approach for the control of the shape of a tendon-driven soft arm. The soft...
This article treats the design and implementation of a multi-input multi-output fractional-order con...
[Abstract] The purpose of this paper is to design a soft robotic neck prototype with two Degrees of ...
This paper has been presented at XXXIX Jornadas de Automática.The purpose of this paper is to design...
Soft robotics is becoming an emerging solution to many of the problems in robotics, such as weight, ...
Tip control is a current open issue in soft robotics; therefore, it has received a good amount of at...
Tip control is a current open issue in soft robotics; therefore, it has received a good amount of at...
This article belongs to the Special Issue Fractional Order Control Techniques for Robots.Controlling...
The purpose of this work is to present a novel control approach for a tendon driven soft robotic sy...
This paper has been presented at 26th International Conference on Robotics in Alpe-Adria-Danube Regi...
The purpose of this work is to present a novel control approach for a tendon-driven elastic continuu...
International audienceThis paper presents a computationally efficient method to model and simulate s...
Continuum soft robots are made up of soft material components (referred to as continuum), rigid comp...
With the accelerated development of robot technologies, optimal control becomes one of the central t...
We present a general strategy for the modeling and simulation-based control of soft robots. Although...
We present a model-based approach for the control of the shape of a tendon-driven soft arm. The soft...
This article treats the design and implementation of a multi-input multi-output fractional-order con...
[Abstract] The purpose of this paper is to design a soft robotic neck prototype with two Degrees of ...
This paper has been presented at XXXIX Jornadas de Automática.The purpose of this paper is to design...
Soft robotics is becoming an emerging solution to many of the problems in robotics, such as weight, ...
Tip control is a current open issue in soft robotics; therefore, it has received a good amount of at...
Tip control is a current open issue in soft robotics; therefore, it has received a good amount of at...