Analysis of the feed device of the units continuous loading of free-flowing materials with a single block boot sections

Отримані залежності швидкості сипкого матеріалу в постачальному пристрої від висоти вільного падіння, коефіцієнта тертя, кута нахилу бокових стінок приймальної воронки, як для випадку нерухомого положення приймальної воронки, так і для випадку обертального руху воронки при різних значеннях кутової швидкості. Devices of continuous action have a number of advantages over systems with cyclic flow (high performance, low energy costs, lower consumption of materials and other). Improvement of continuous action is an actual scientific problem (is an urgent task). Аn analysis was Conducted of the influence of parameters of feeding mechanism of device on the speed of the free-flowing material. The resulting dependence of the speed of the free-flowing material in the feed device from the height of the free flight, the coefficient of friction, angle of inclination of the side walls of the receiving receiving hopper, as for the case of fixed position receiving hopper, and for the case of circular motion of the funnel for different values of the angular velocity. Conclusions: 1. At a stationary position of the funnel ensures a safe movement of the bulk material. 2. When a reciprocating rotary motion around the axis of the funnel can be a risk disturbing the process. To ensure reliable movement of bulk material is necessary to limit the angular rotation speed, or decrease the frictional force by applying materials with low friction for the respective surfaces