Boundary layer ingestion performance assessments with application to business jets.

Advancements in propulsion system performance are reliant on improvements in propulsive efficiency, through increases in turbofan bypass ratio. This requires larger nacelle diameters, which incur external aerodynamic penalties. Business jets cruise at high subsonic Mach numbers, and are therefore normally propelled by high specific thrust turbofans. The business jet may benefit from a BLI propulsion system, whereby the specific thrust may be reduced without incurring such heavy penalties in external drag rise. The aim of the research is to perform a design exploration study on BLI applied to a business jet, with emphasis on external aerodynamics. Methods are developed to thoroughly analyse aerodynamic coupling between propulsor and airframe. A multi-physics, control-volume based approach led to the development of near-field momentum-based, far-field momentum-based and energy-based net-vehicle-force formulations. The former two, allowed for a set of thrust-force accounting systems to be defined. Energy-based methods, allowed for flow-field decompositions into different physical mechanisms. These include flow phenomena internal and external to the jet plume. The practical implications associated with applying these methods to RANS CFD solutions, is examined. This hinges around viscous stress tensor field continuity in the flow domain. It was found that the k — w SST turbulence model, along with a Green-Gauss Cell-Based gradient scheme, produced a continuous viscous stress tensor field. Having resolved this, the assessment methods were applied to solutions of non-propelled and propelled bodies. These methods were applied to control volumes having varying extents, which showed the far-field momentum-based method to be sensitive to spurious affects. The energy-based formulation, on the other hand, was observed to be relatively insensitive spurious affects. Good agreement (within 4%) was found between the forces predicted by all three methods over a non-propelled body. A very close agreement was observed between far-field momentum-based and energy-based results (within 1%) over the propelled body. However, much larger discrepancies were observed when compared against the near-field results. This was attributed to the increase in flow-field complexity, which now contained BL, shock and jet interaction regions. A design exploration study was performed by retrofitting a business jet with a fuselage concentric propulsor, powered by the baseline podded engines. A preliminary parametric study was first performed to gauge conditions favourable to BLI benefit. A ram drag approach to modelling BLI benefit was based on a flat plate analogy to obtain boundary layer profiles. Thrust-split, BLR, fan efficiency and intake pressure recoveries, were varied parametrically to asses potential benefits. An optimum SFC benefit between 5-7.5% was achieved at thrustsplits between 30-35%, when ingesting 65-90% of the BL thickness. This guided the the parametric CFD studies, where two tail-cone positions were examined. The first was placed at the top of the tail-cone, and the second positioned midway along the tail-cone. Benefits were only realised for the latter, where a 3-4% improvement in SFC was realised for a thrust-split around 20%, by ingesting 40% of the BL thickness. Energy breakdowns and decompositions were performed on all of the cases. One of the significant outcomes of this research was revealing that a significant proportion of the thrust force may be attributed to the isentropic expansion region within the jet plume's core.PhD in Aerospac