Design of a Two-Area Automatic Generation Control Using a Single Input Fuzzy Gain Scheduling PID Controller

International Journal of Intelligent Engineering and Systems is an OPEN ACCESS international journalAn Automatic Generation Control (AGC) is considered a substantial stage in power systems to ensure that the area-frequency response and the tie-line power of an interchanging steady state errors are acceptable values especially at the transient state. Whiles, several techniques have been designed for the AGC, Fuzzy logic control is commonly used. However, it is faced a longer processing time issues to adjust the accurate single in the transient state. In this paper, a Single Input Fuzzy Logic Gain Scheduling PID Controller (SIFL-PID) is designed as a supplementary loop for AGC of two area interconnected power system to reduce the processing time. The lower number of rules and the simple parameters of the SIFL-PID will contribute to minimise the design time required for the Fuzzy Logic Gain Scheduling FL-PID. The SIFL-PID also reduced the signed distance technique when it is generated one input variable simple mathematical model of the system. In comparison with the FL-PID, the number of rules controlling system can be significantly reduced. The main outcome of this work is that it is assessed the effectiveness of the SIFL-PID for two power systems that are interconnected when it is compared with the FL-PID using the MATLAB/SIMULINK environment. The results prove that, the simple design of the SIFL-PID control is validated under various condition tests. Performance analysis standards are also performed. The results of all simulations demonstrate that the suggested controller provides better performances such as like as minimum Performance analysis standards, frequency deviation power deviations and low overshoot and undershoo