In the present paper, the effect of magnetic fields 17–98 mT on the autocatalytic deposition of Co1−x–Fex 35–42 atom % thin films is addressed. The deposition kinetics was strongly related to field intensity. Low magnetic fields 17 mT increased the deposition rate by a factor of 2, whereas high magnetic fields above 76 mT completely inhibited the deposition process after a few minutes from the beginning of the reaction. Alloy composition was also affected by the application of magnetic fields. Depending on the intensity of the applied field, the Fe content in the alloy gradually changed from 36 to 41 atom % below 200 nm and from 42 to 37 atom % above 200 nm of thickness. On average, the application of magnetic fields during the deposition p...
Fe Co films were prepared by electrodeposition from an electrolyte containing citric acid and anneal...
This report is on the growth of Fe3O4 nanofilms on Al2O3(0001) and MgO(001) substrates with and with...
Co-Fe-B films were prepared by electroless plating. As-deposited films were thermomagnetically treat...
In the present paper, the effect of magnetic fields 17–98 mT on the autocatalytic deposition of Co1−...
Co100−xFex (x = 0; 50; 30; 20) films are prepared by pulse-reverse plating onto Cu foils, in the pre...
Magnetic fields parallel to electrodes were introduced during plating process to prepare cobalt film...
This paper describes the effect of applied magnetic field on magnetic properties of Sm-Fe-N thick fi...
Magnetic field-assisted CVD offers a direct pathway to manipulate the evolution of microstructure, p...
Fe and Co films were galvanostatically electrodeposited at 10 mA cm-2 on Cu substrate in sulfate aqu...
Magnetic field-assisted CVD offers a direct pathway to manipulate the evolution of microstructure, p...
Chemical vapor deposition of iron pentacarbonyl (Fe(CO)(5)) in an external magnetic field (B = 1.00 ...
Abstract: The influence of the electrodeposition potential on the compositional, magnetic, and micro...
Fe thin films have been deposited by thermal evaporation onto glass substrate. The thickness ranges ...
The electrodeposition of Ni and Ni-Co alloy from a nickel Watt's solution in the absence and presenc...
Magnetic, chemical and structural properties of electrosynthesized CoxNi100 − x have been studied. T...
Fe Co films were prepared by electrodeposition from an electrolyte containing citric acid and anneal...
This report is on the growth of Fe3O4 nanofilms on Al2O3(0001) and MgO(001) substrates with and with...
Co-Fe-B films were prepared by electroless plating. As-deposited films were thermomagnetically treat...
In the present paper, the effect of magnetic fields 17–98 mT on the autocatalytic deposition of Co1−...
Co100−xFex (x = 0; 50; 30; 20) films are prepared by pulse-reverse plating onto Cu foils, in the pre...
Magnetic fields parallel to electrodes were introduced during plating process to prepare cobalt film...
This paper describes the effect of applied magnetic field on magnetic properties of Sm-Fe-N thick fi...
Magnetic field-assisted CVD offers a direct pathway to manipulate the evolution of microstructure, p...
Fe and Co films were galvanostatically electrodeposited at 10 mA cm-2 on Cu substrate in sulfate aqu...
Magnetic field-assisted CVD offers a direct pathway to manipulate the evolution of microstructure, p...
Chemical vapor deposition of iron pentacarbonyl (Fe(CO)(5)) in an external magnetic field (B = 1.00 ...
Abstract: The influence of the electrodeposition potential on the compositional, magnetic, and micro...
Fe thin films have been deposited by thermal evaporation onto glass substrate. The thickness ranges ...
The electrodeposition of Ni and Ni-Co alloy from a nickel Watt's solution in the absence and presenc...
Magnetic, chemical and structural properties of electrosynthesized CoxNi100 − x have been studied. T...
Fe Co films were prepared by electrodeposition from an electrolyte containing citric acid and anneal...
This report is on the growth of Fe3O4 nanofilms on Al2O3(0001) and MgO(001) substrates with and with...
Co-Fe-B films were prepared by electroless plating. As-deposited films were thermomagnetically treat...