Thermal Analysis Based on Dynamic Performance of Rocker Arm Full-Type Needle Bearings

Based on a dynamic analysis of rolling bearings, the equations for rocker arm full-type needle bearings were established by considering the traction coefficients of FVA-M reference lubricating oil, and then they were solved by the GSTIFF (Gear Stiff) integer algorithm with variable steps. The influence of working conditions on friction power consumption and the lubricant’s convective coefficients were investigated. Then, on the basis of the heat generation and heat transfer mechanisms, the frictional power consumption was used as the boundary condition of the bearings’ simulation model. Finally, temperature fields were calculated by the finite element method. The results showed that the overall value of frictional power consumption increased gradually with the increase in either the radial load or the rotation speed. The presence or absence of lubricating oil film in the contact area affected the heat conduction of the bearing, resulting in a temperature difference. Compared with the temperature of the radial load exerted on the bearing, the maximum temperature was more sensitive to the variations in the rotation speed. When running under the conditions of a fatigue life test, the steady-state temperature value of the bearing gradually decreased from the outer raceway to the needle roller and the outer ring surface, and then to the central shaft. The maximum temperature rise was 25.9 °C relative to the ambient temperature