Determination of the effective elastic–plastic response of metal–ceramic composites

The mechanical response of metal–ceramic composites is analysed through a homogenization model accounting for the mechanical behaviour of the constituent materials. In order to achieve this purpose a nonlinear homogenization method based on the phase field approach has been suitably implemented into a numerical code. A prescribed homogenized strain state is applied to a unit volume element of a metal–ceramic composite with proportional loading in which all components of the strain tensor are proportional to one scalar parameter. The mechanical response of the material has been modeled by considering a von Mises plasticity model for the metal phase and a Drucker–Prager associative elastic–plastic material model for the ceramic phase. A two stages plasticity has been obtained in which inelastic strain develops in the metal phase followed by a fully plastic response. A comparison with a finite element model of the stress–strain response of an axisymmetric unit cell has been carried out with the purpose to validate the homogenization based modeling presented in the paper. Plastic parameters of a Drucker–Prager yield surface for the homogenized composite have been calculated at different materials compositions. Associative Drucker–Prager plasticity has been found to be accurate for high ceramic content