Assessment of the Seafloor Topography Accuracy in the Emperor Seamount Chain by Ship-Based Water Depth Data and Satellite-Based Gravity Data

The seafloor topography estimation is very important, while the bathymetry data and gravity data are scarce and uneven, which results in large errors in the inversion of the seafloor topography. In this paper, in order to reduce the influence of errors and improve the accuracy of seafloor inversion, the influence of different resolution data on the inversion topography in the Emperor Seamount Chain are investigated by combining ship water depth data and satellite gravity anomaly data released by SIO V29.1. Through the comparison of different resolution models, it is found that the choice of resolution affects the accuracy of the inversion terrain model. An external comparison is presented by using the international high-precision topography data and check points observations. The results show that with the increase in resolution, the fitting residuals obtained by the scale factor are optimized, and the precision of the terrain model is gradually approaching the S&S V19.1 and GEBCO-2020 models, but is better than the ETOPO1 and SRTM 30 models. By external validation using the check points, the standard deviation of the difference was reduced from 58.92 m to 47.01 m, and the correlation between the inverted terrain and the NGDC grid model was increased from 0.9545 to 0.9953. For recovering the Emperor Seamount Chain terrain, the relative error was gradually decreased with the improvement of resolution. The maximum relative error is reduced from 1.09 of 2′ topography to 0.74 of 10″ topography, and the average error is reduced from 0.04 to 0.01 with an improvement by 32.11%. The terrain error between the inverted terrain model and the NGDC grid model is gradually reduced, while the error percentage is increasing by 25.51% and 21.49% in the range of −50 to 50 m and −100 to 100 m, respectively. Furthermore, the sparse area can effectively reduce the terrain standard deviation and improve the terrain correlation by increasing the resolution through the analysis of different density subsets. The error was decreased most significantly in sparse and dense homogeneous regions with increasing resolution