Selective Power-Loss-Protection Method for Write Buffer in ZNS SSDs

Most SSDs (solid-state drives) use an internal DRAM (Dynamic Random Access Memory) to improve the I/O performance and extend SSD lifespan by absorbing write requests. However, this volatile memory does not guarantee the persistence of buffered data in the event of sudden power-off. Therefore, highly reliable enterprise SSDs employ power-loss-protection (PLP) logic to ensure the durability of buffered data using the back-up power of capacitors. The SSD must provide enough capacitors for the PLP in proportion to the size of the volatile buffer. Meanwhile, emerging ZNS (Zoned Namespace) SSDs are attracting attention because they can support many I/O streams that are useful in multi-tenant systems. Although ZNS SSDs do not use an internal mapping table unlike conventional block-interface SSDs, a large write buffer is required to provide many I/O streams. The reason is that each I/O stream needs its own write buffer for write buffering where the host can allocate separate zones to different I/O streams. Moreover, the larger capacity and more I/O streams the ZNS SSD supports, the larger write buffer is required. However, the size of the write buffer depends on the amount of capacitance, which is limited not only by the SSD internal space, but also by the cost. Therefore, in this paper, we present a set of techniques that significantly reduce the amount of capacitance required in ZNS SSDs, while ensuring the durability of buffered data during sudden power-off. First, we note that modern file systems or databases have their own solutions for data recovery, such as WAL (Write-ahead Log) and journal. Therefore, we propose a selective power-loss-protection method that ensures durability only for the WAL or journal required for data recovery, not for the entire buffered data. Second, to minimize the time taken by the PLP, we propose a balanced flush method that temporarily writes buffered data to multiple zones to maximize parallelism and preserves the data in its original location when power is restored. The proposed methods are implemented and evaluated by modifying FEMU (QEMU-based Flash Emulator) and RocksDB. According to experimental results, the proposed selective-PLP reduces the amount of capacitance by 50 to 90% while retaining the reliability of ZNS SSDs. In addition, the balanced flush method reduces the PLP latency by up to 96%