This paper presents a new Infrared thermography system for thermal characterization of semiconductor electronic devices in transient and steady-state applications. The developed set-up is based on an IR camera having a 100Hz frame-rate at full-frame and a focal plane array of 640×512 InSb sensors. In order to extend the dynamic capabilities of the system a synchronization network generates timing signals to drive the experiment and trigger the IR-camera in an equivalent-time acquisition mode, up to 1MHz equivalent bandwidth. Moreover the proposed synchronized solution is able to detect thermal maps in a non-repetitive, single event, experiment. To prove the effectiveness of the proposed IR system, thermal measurements are presented on comme...
An important problem in industrial system, both working in low and medium power, is the possibility ...
In this paper the feasibility study of an IR sensor card is presented. The methodology and the resul...
Zaproponowano zastosowanie techniki termowizyjnej do oceny poprawność konstrukcji i działania urządz...
This paper presents a new Infrared thermography system for thermal characterization of semiconductor...
In this paper we describe a novel temperature mapping system based on a standard infrared camera wit...
We have combined InfraRed thermography and thermal wave techniques to perform microscale, ultrafast ...
The thermal properties of power semiconductor devices are in general characterized by their thermal ...
Infrared analysis is a non-invasive technique especially suitable for electronic devices monitoring,...
The use of a commercially available photodetector based infrared thermography system, operating in t...
In this paper new thermographic techniques with significant improved temperature and/or spatial reso...
In this paper the principal and more important application of Infrared Thermography are discussed. I...
Static and dynamic hot spots limit the performance and reliability of electronic devices and ICs. We...
In this paper the methodology and the results of a quasi real-time thermal characterization tool and...
In this paper the methodology and the results of a quasi real-time thermal characterization tool and...
Lock-in thermography based on an infrared (IR) camera has proven to be a useful tool for failure ana...
An important problem in industrial system, both working in low and medium power, is the possibility ...
In this paper the feasibility study of an IR sensor card is presented. The methodology and the resul...
Zaproponowano zastosowanie techniki termowizyjnej do oceny poprawność konstrukcji i działania urządz...
This paper presents a new Infrared thermography system for thermal characterization of semiconductor...
In this paper we describe a novel temperature mapping system based on a standard infrared camera wit...
We have combined InfraRed thermography and thermal wave techniques to perform microscale, ultrafast ...
The thermal properties of power semiconductor devices are in general characterized by their thermal ...
Infrared analysis is a non-invasive technique especially suitable for electronic devices monitoring,...
The use of a commercially available photodetector based infrared thermography system, operating in t...
In this paper new thermographic techniques with significant improved temperature and/or spatial reso...
In this paper the principal and more important application of Infrared Thermography are discussed. I...
Static and dynamic hot spots limit the performance and reliability of electronic devices and ICs. We...
In this paper the methodology and the results of a quasi real-time thermal characterization tool and...
In this paper the methodology and the results of a quasi real-time thermal characterization tool and...
Lock-in thermography based on an infrared (IR) camera has proven to be a useful tool for failure ana...
An important problem in industrial system, both working in low and medium power, is the possibility ...
In this paper the feasibility study of an IR sensor card is presented. The methodology and the resul...
Zaproponowano zastosowanie techniki termowizyjnej do oceny poprawność konstrukcji i działania urządz...