Add to ORKGA polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium substrates, in order to investigate the influence of the surface properties on adhesion. The curing kinetics of the adhesive, in controlled temperature and humidity conditions, was evaluated and an elastomeric product was obtained after curing. The surface properties of the cured resin and of the different substrates (PPO/PA6 blend, polypropylene and aluminium) were evaluated and compared by using a contact angle technique. Adhesion measurements were performed using single-lap joints; the strength values obtained were correlated to the structure of the adhesive and to the surface treatments performed on the substrates
Diplomová práce se zaobírá studiem polyurethanových lepidel a jejich mechanických vlastnos-tí. První...
To improve their adhesion strength, polymeric surfaces are usually modified through different treatm...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
The cost of most primary materials is increasing, therefore, finding innovative solutions for the re...
This thesis work deals with (a) Curing of reactive, hot-melt polyurethane adhesives and (b) Adsorpti...
An increase in applications of pultruded composite material has been noted in the last decades. The ...
In this contribution, the results of measurements are presented concerning rheological and mechanic...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...
4 types of two component adhesives based on modified silyl-terminated polyether polymer (MS Polymer)...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...
The cost of most primary materials is increasing, therefore, finding innovative solutions for the re...
Diplomová práce se zaobírá studiem polyurethanových lepidel a jejich mechanických vlastnos-tí. První...
To improve their adhesion strength, polymeric surfaces are usually modified through different treatm...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium s...
The cost of most primary materials is increasing, therefore, finding innovative solutions for the re...
This thesis work deals with (a) Curing of reactive, hot-melt polyurethane adhesives and (b) Adsorpti...
An increase in applications of pultruded composite material has been noted in the last decades. The ...
In this contribution, the results of measurements are presented concerning rheological and mechanic...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...
4 types of two component adhesives based on modified silyl-terminated polyether polymer (MS Polymer)...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...
The cost of most primary materials is increasing, therefore, finding innovative solutions for the re...
Diplomová práce se zaobírá studiem polyurethanových lepidel a jejich mechanických vlastnos-tí. První...
To improve their adhesion strength, polymeric surfaces are usually modified through different treatm...
The present work deals with the problematic adhesive bonding of substrates with low surface energy. ...