The use of electronic components in railgun projectiles

This paper deals with experiments and calculations performed in order to investigate the influence of the electromagnetic hardening of payloads in a railgun. This is a complex task: besides the large amplitudes of the in-bore magnetic fields due to the pulsed current, the exit of the projectile from the muzzle and the consequences of plasma arcs have to be considered. At the muzzle the magnetic induction can drop from several Teslas to zero within some microseconds, leading to very high induced voltages and electric fields in the metallic parts of the projectile. On the other hand, the electric contact established by solid armatures tends to develop into electric arcs at high velocities during the launch. These plasma arcs as well as the closing switch transients of the railgun circuit are a source of electromagnetic radiation in a broad spectral range. Some electronic devices were selected and tested with static setups corresponding to the previous conditions. In a first phase a series of static railgun experiments (no projectile movement) was performed. In a second phase, static experiments simulating the muzzle exit conditions were carried out. Finally, the influence of electromagnetic waves emitted during railgun experiments on electronic devices was investigated, using a static setup with a conventional spark gap