Using electric power to synthesize resorcinol-formaldehyde gels with enhanced characteristics

A novel electrochemical approach was introduced for crosslinking resorcinol-formaldehyde (RF) gels at room temperature without utilizing a catalyst or a buffer. The electrochemically cross-linked gels and their subsequent activated carbons exhibited enhanced physical properties. They were characterized via different methods such as scanning electron microscope (SEM), Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), and surface area and porosity analyzer. The gels prepared with this novel approach range from dark red to deep yellow in color; and consist of different particle sizes depending on the used voltage. FTIR spectra showed that the gels prepared with the novel and conventional methods have identical chemical identities. However, the RF gels prepared with the novel approach of synthesis expose more controllable properties such as pore structure, surface area, particle size, etc, than those prepared with the conventional method, which makes them easier to design for different applications. The corresponding activated carbons showed higher surface areas and narrower micropore distributions that can be varied easily with voltage, which is a key factor in this work as a controlling parameter. Consequently, the approach of crosslinking gels with electric power is important for the controlled preparation of many new and nontraditional cross-linked gels for various applications.This publication was made possible by NPRP award (NPRP 08?014?2?003) from the Qatar National Research Fund (a member of Qatar Foundation). Statements made herein are solely responsibility of authors. Technical support from Department of Chemical Engineering, Central Laboratory Unit (CLU) and Gas Processing Centre (GPC) at Qatar University is also acknowledged.Scopus2-s2.0-8507858549