Power System Oscillations with Different Prevalence of Grid-Following and Grid-Forming Converters

The oscillatory behaviour of the power system is an aspect that is significantly affected by the increasing integration of converter-based generation sources. Several works address the impact of non-synchronous generation on the operation of the system from different points of view, but only a few studies focus on power-frequency oscillations with a prevalence of generation sources interfaced through power electronics. A lack of research can be found in particular in the comparative analysis of the two main control strategies for power converters, namely grid-following and grid-forming. The article aims to contribute to this direction, starting from a theoretical analysis of the two control structures and then examining the case study of an existing transmission system. The research provides a specific insight into the fundamental aspects related to synchronisation mechanism and inertial capabilities of both grid-following with synthetic inertia and grid-forming controls. The difference in the relationship between synchronisation unit and inertial capability is recognised as the fundamental aspect determining the different impacts on the oscillatory characteristics of the system. The observation derived in the theoretical analysis is then applied to an actual power system with a high predominance of converter-based generation, considering the Colombian interconnected national system as a case study