Design of Flexible Metal–Organic Framework-Based Superprotonic Conductors and Their Fabrication with a Polymer into Proton Exchange Membranes

In recent times, the deployment of metal–organic frameworks (MOFs) to develop efficient proton conductors has gained immense popularity in the arena of sustainable energy research due to the ease of structural and functional tunability in MOFs. In this work, we have focused on developing “flexible MOF”-based proton conductors with Fe-MIL-53-NH2 and Fe-MIL-88B-NH2 MOFs using postsynthetic modification (PSM) as the tool. Taking advantage of the porous nature of these frameworks, we have carried out PSM on the primary amine groups present on the MOFs and converted them to −NH(CH2CH2CH2SO3H) groups. The PSM increased the number of labile protons in the channels of the modified MOFs as well as the extent of H-bonded networks inside the framework. The modified Fe-MIL-53-NH2 and Fe-MIL-88B-NH2 MOFs, named hereafter as 53-S and 88B-S, respectively, showed proton conductivity of 1.298 × 10–2 and 1.687 × 10–2 S cm–1 at ∼80 °C and 98% relative humidity (RH), respectively. This reflects ∼10-fold and ∼5-fold increases in their proton conductivity than their respective parent MOFs. Since MOFs as such are difficult to make directly into flexible membranes, and these are essential for practical applications as proton conductors, we have incorporated 53-S and 88B-S as fillers into a robust imidazole-based polymer matrix, namely, OPBI [poly(4,4′-diphenylether-5,5′-bibenzimidazole)]. The resulting polymer–MOF mixed matrix membranes (MMMs) after doping with phosphoric acid (PA) performed as flexible proton exchange membranes (PEMs) above 100 °C under anhydrous conditions and were found to be much more efficient and stable than the pristine OPBI membrane (devoid of any filler loading). By optimizing the amount of filler loading in the membrane, we obtained the highest proton conductivity of 0.304 S cm–1 at 160 °C under anhydrous conditions