Structural and electrical properties of magnetron sputtered Ti(ON) thin films:The case of TiN doped in situ with oxygen.

International audienceIncorporation of oxygen into TiN lattice results in formation of titanium oxynitrides, TiOxNy that have become particularly interesting for photocatalytic applications. Elaboration as well as characterization of TiN and in situ oxygen-doped thin films is the subject of this paper. Thin films, 250–320nm in thickness, have been deposited by dc-pulsed magnetron reactive sputtering from Ti target under controllable gas flows of Ar, N2 and O2. Optical monitoring of Ti plasma emission line at = 500nm has been implemented in order to stabilize the sputtering rate. Scanning electron microscopy (SEM), X-ray diffraction in grazing incidence (GIXRD), micro-Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), optical spectrophotometry and four-point probe electrical resistivity measurements have been performed in order to follow evolution of film physical parameters as a function of the oxygen flow rate O2 at which the films were deposited. The relationship between O2 expressed in standard cubic centimetres per minute, sccm and the nitrogen/oxygen content in thin films has been established by means of the analysis of the XPS spectra. GIXRD studies indicate that incorporation of oxygen results in a progressive loss of preferential orientation in 111 direction, a change in the grain size from 16nm for TiN to about 3 nmfor films deposited at O2 = 1.32 sccm and a decrease in the lattice constant. A systematic shift of all X-ray diffraction (XRD) lines towards higher diffraction angles is consistent with substitution of oxygen for nitrogen. Micro-Raman investigations indicate amorphisation of thin films upon oxidation. Binding energies determined fromfitting of the XPS results concerning the N1s and Ti2p lines give evidence of the presence of TiOxNy compound. Red-shift of the plasma reflectance edge upon TiN oxidation is correlated with a decreased carrier concentration. Metal–semiconductor transition can be expected on the basis of the electrical conductivity decrease and development of the fundamental absorption across the forbidden band of TiO2 upon increase in the oxygen flow rate. Additional absorption feature in the visible range, being a consequence of coexistence of free-electron and interband absorption within almost the same spectral range ( = 400–600 nm) seems to be very promising for photocatalytic applications of titanium oxynitride thin films