Effect of deformation sequence and coiling conditions on precipitation strengthening in high Ti-Nb-microalloyed steels

In this work, multipass torsion tests followed by coiling simulations under different conditions have been performed with a reference Nb (0.03 pct) and a high Ti (0.1 pct)-Nb-microalloyed (0.03 pct) steel. In the case of the high Ti steel, estimated yield strengths close to or over 700 MPa were obtained for some of the conditions researched. However, a very significant effect of previous austenite grain size and strain accumulation on precipitation strengthening has also been observed. As a result, depending on deformation sequence and final cooling conditions, the coiling simulation temperatures that lead to the highest mechanical strength varied from 600 degrees C to 500 degrees C. The effect of increasing strain accumulation was mainly related to higher phase transformation temperatures, which led to a lower driving force for precipitation and higher microalloying element diffusivity, resulting in the formation of less and coarser precipitates