Analysis of the Possibilities of Reduction of Exhaust Emissions from a Farm Tractor by Retrofitting Exhaust Aftertreatment

The paper evaluates particulate matter emissions and exhaust gas components from retrofitted engines of non-road vehicles measured under actual operating conditions. The content is divided into three main parts: formation of guidelines, production of the filter and emission tests. The obtained results clearly indicate excess PM and PN emissions from the engine under actual operating conditions when compared to the limits outlined in the type approval standards. Moreover, it was observed that the actual conditions are reflected to a very small extent at the points included in the stationary homologation test cycle. Based on these observations, the authors decided to modify the stationary test cycle. The measured exhaust gas compositions and their mass flow rates were used to create the geometry of the newly developed filter. The paper contains detailed results of the relative specific exhaust emissions of particulate matter and gaseous components at individual engine operating points. The exhaust emissions analysis made it possible to draw conclusions regarding the operation of the newly designed system. One of them is that fitting a metal-support particulate filter in the exhaust system significantly contributes to reducing the exhaust emissions