Characteristics of Mining-Induced Slope Movement and Ground Behavior under Gully Landforms

Exploring the phenomenon of surface cracks and the abnormal phenomenon of ground behavior during coal mining under gully landforms, laboratory physical similarity simulation models were established to study the movement characteristics and ground behavior laws of working faces of different mining methods under gully landforms. The results indicate that in cases when a roadway is situated below the top of the slope, the corresponding deformation of the surrounding rock of the roadway is aggravated by the mining stress. Furthermore, when a roadway is located below the base of the gully, it is less affected by mining; thus, it could remain relatively stable. The ground behavior laws of working faces in gully geomorphology areas are associated with the position of the working face and the direction of working: when mining towards the gully, the ground behavior appeared relatively gentle and the surface slipped towards the gully; when mining away from the gully, the ground behavior appeared intense, the pressure was sudden and short, and with the increase in overburden thickness, the interval distance periodically decreased. When a working face passes through a gully, dumping of the hydraulic support should be prevented in the section of mining towards the gully; in sections of mining away from gully, the support strength should be strengthened to prevent the support and other equipment from being crushed. In actual mining, mining towards a gully should be adopted as much as possible in the stoping of the working face. In this way, the ground behavior is gentle, the interval distance periodical weight is longer, and the advance abutment pressure is small