PURPOSE: We assessed the performance of heated wire humidifiers (HWHs), which should avoid water condensation in the circuit. METHODS: We evaluated the efficiency of 3 HWHs, MR850 (Fisher & Paykel, Auckland, New Zealand), CONCHATHERM IV (Hudson RCI, Temecula, Calif), and DAR HC 2000 (Mallinckrodt DAR, Mirandola, Italy), in comparison with that of the MR730 heated humidifier (HH), which has a standard circuit. We measured gas temperature and absolute humidity (AH) at the Y piece of the ventilatory circuit using a test lung ventilated at 2 minute ventilation volumes (5 and 15 L/min). Temperature levels at the Y piece of the ventilatory circuit of the HHs were set at 35 degrees C, 37 degrees C, and 39 degrees C with different gradients (-2 deg...
Introduction: gas humidification is essential during invasive ventilation as upper airways are by-pa...
Study objective: To evaluate the safety of a combined heat and moisture exchanger filter (HMEF) for ...
Study objective: To determine the correlation between simple rating of condensation seen in the flex...
PURPOSE: We assessed the performance of heated wire humidifiers (HWHs), which should avoid water con...
During invasive mechanical ventilation due to the dryness of medical gases is necessary to provide a...
Although heated humidifiers are considered the most efficient humidification devices for mechanical ...
OBJECTIVE: During invasive mechanical ventilation, inspired gases must be humidified. We previously ...
INTRODUCTION: In order to improve the efficiency of heat moisture exchangers (HMEs), new hybrid humi...
Objective: To evaluate the effects of a heat and moisture exchanger and a heated humidifier on respi...
International audienceBackground: During invasive ventilation, the upper airway is bypassed and no l...
OBJECTIVE: Heat and moisture exchangers (HME) increase circuitry deadspace compared to heated humidi...
Objective: To compare the incidence of ventilator-associated pneumonia (VAP) in patients ventilated ...
Objective: To research the effectiveness on humidifying, respiratory mechanics, bacterial colonizati...
OBJECTIVES: To evaluate and compare the efficiency of humidification in available heat and moisture ...
BACKGROUND: Noninvasive positive-pressure ventilation (NPPV) delivers air at a high flow, which is a...
Introduction: gas humidification is essential during invasive ventilation as upper airways are by-pa...
Study objective: To evaluate the safety of a combined heat and moisture exchanger filter (HMEF) for ...
Study objective: To determine the correlation between simple rating of condensation seen in the flex...
PURPOSE: We assessed the performance of heated wire humidifiers (HWHs), which should avoid water con...
During invasive mechanical ventilation due to the dryness of medical gases is necessary to provide a...
Although heated humidifiers are considered the most efficient humidification devices for mechanical ...
OBJECTIVE: During invasive mechanical ventilation, inspired gases must be humidified. We previously ...
INTRODUCTION: In order to improve the efficiency of heat moisture exchangers (HMEs), new hybrid humi...
Objective: To evaluate the effects of a heat and moisture exchanger and a heated humidifier on respi...
International audienceBackground: During invasive ventilation, the upper airway is bypassed and no l...
OBJECTIVE: Heat and moisture exchangers (HME) increase circuitry deadspace compared to heated humidi...
Objective: To compare the incidence of ventilator-associated pneumonia (VAP) in patients ventilated ...
Objective: To research the effectiveness on humidifying, respiratory mechanics, bacterial colonizati...
OBJECTIVES: To evaluate and compare the efficiency of humidification in available heat and moisture ...
BACKGROUND: Noninvasive positive-pressure ventilation (NPPV) delivers air at a high flow, which is a...
Introduction: gas humidification is essential during invasive ventilation as upper airways are by-pa...
Study objective: To evaluate the safety of a combined heat and moisture exchanger filter (HMEF) for ...
Study objective: To determine the correlation between simple rating of condensation seen in the flex...