Calibration and Testing of Discrete Element Modeling Parameters for Fresh Goji Berries

This paper aims at the standard grading of fresh goji berries and develops a variable gap-type fresh goji berry grading machine. To establish a complete simulation model, the discrete element parameters of the model were calibrated by a combination of physical experiments and simulation experiments. The outline of the goji berry was extracted by the SFM-CMVS technique, and a goji berry model was obtained using the multi-spherical particle model filling method in the EDEM software. By designing the free-fall, suspension collision, slope slip, and slope rolling experiments, we obtained the discrete element simulation parameters: the inter-particle collision restitution coefficient was 0.158, the collision restitution coefficient of fresh goji berry–silicone rubber material was 0.195, the static friction coefficient of fresh goji berry–silicone rubber material was 0.377, and the rolling friction coefficient of fresh goji berry–silicone rubber material was 0.063. By designing the steepest ascent search and central composite design experiments with the angle of repose (AoR) value obtained from the physical experiment as the target value (31.27°), we determined the inter-particle static friction coefficient to be 0.454 and the inter-particle rolling friction coefficient to be 0.037. Validation tests were conducted on the calibrated discrete element modeling parameters, and the results showed that the established fresh goji berry model and the optimally calibrated parameter combination are effective for discrete element studies on fresh goji berries