Effect of Cellulose Nanofibrils on the Physical Properties and Frost Resistance of Pervious Concrete

Pervious concrete has good water permeability and, if used in construction, it can alleviate the heat island effect. However, its low strength and poor durability are major obstacles to its use. This study shows that nano-reinforced pervious concrete created by incorporating cellulose nanofibrils (CNFs) can improve the physical properties and increase the durability of pervious concrete. CNFs were added to the concrete mix in proportions ranging from 0.05% to 0.2% by weight of binder. The additions were found to alter matrix rheology. The hydration kinetics of matrix with differing CNF contents were compared and analyzed. The experimental results show the addition of CNFs delayed peak heat flow and maximum cumulative heat. The 28 d compressive strength of pervious concrete increased by up to 26.5% and 28 d flexural strength by up to 25.8% with the addition of 0.05–0.2% CNFs. Addition of 0.1% and 0.2% CNFs increased water permeability. Addition of 0.05–0.15% CNFs decreased mass loss by 73.2–83.7% after 150 freeze–thaw cycles, which corresponded to an increase in frost resistance. Denser matrices and stronger interfacial transition zones were observed using scanning electron microscopy when 0.05–0.2% CNFs were added