Implementation of a Low-Cost Data Acquisition System on an E-Scooter for Micromobility Research

[EN] In recent years, cities are experiencing changes in the ways of moving around, increasing the use of micromobility vehicles. Bicycles are the most widespread transport mode and, therefore, cyclists¿ behaviour, safety, and comfort have been widely studied. However, the use of other personal mobility vehicles is increasing, especially e-scooters, and related studies are scarce. This paper proposes a low-cost open-source data acquisition system to be installed on an e-scooter. This system is based on Raspberry Pi and allows collecting speed, acceleration, and position of the e-scooter, the lateral clearance during meeting and overtaking manoeuvres, and the vibrations experienced by the micromobility users when riding on a bike lane. The system has been evaluated and tested on a bike lane segment to ensure the accuracy and reliability of the collected data. As a result, the use of the proposed system allows highway engineers and urban mobility planners to analyse the behaviour, safety, and comfort of the users of e-scooters. Additionally, the system can be easily adapted to another micromobility vehicle and used to assess pavement condition and micromobility users¿ riding comfort on a cycling network when the budget is limited.This research was funded by MCIN/AEI/10.13039/501100011033, grant number PID2019-111744RB-I00.Pérez Zuriaga, AM.; Llopis-Castelló, D.; Just-Martínez, V.; Fonseca-Cabrera, AS.; Alonso-Troyano, C.; García García, A. (2022). Implementation of a Low-Cost Data Acquisition System on an E-Scooter for Micromobility Research. Sensors. 22(21):1-18. https://doi.org/10.3390/s22218215118222