Add to ORKGThe purpose of this study is to investigate the effect of earthquake in low, medium and high rise structures in Malaysia. Structural design in Malaysia may overlook the significance of earthquake loading as earthquakes rarely happen in Malaysia region. The occurrences of several tremors in neighboring countries such as Philippines and Indonesia have triggered a series of vibrations which were felt on some of the buildings in Malaysia. This study shows the analysis of low, medium and high rise steel structures subjected to earthquake loading in provision of Eurocode 8 EN 1998-1:2004
Most structures in Malaysia do not consider for seismic design during its service lifetime. However,...
Previously, damaging earthquakes were fortunately rare in Malaysia. However, after Sumatera-Andaman ...
The location of Malaysia is considered safe from seismic and not within the Pacific Ring of Fire but...
The purpose of this study was to investigate the effect of earthquake and wind loading on high rise ...
Buildings in Malaysia are usually designed and analysed without provisions and considerations for ea...
Normally in Malaysia, lateral force that is taken into consideration in design is wind load. Tremor...
Malaysia region is one of the areas with low seismic hazard, but with high consequence. Although, t...
In Malaysia, even though the country can be considered as a low seismic area, the structural safety ...
Malaysia is fortunate because it is located outside the Pacific Ring-Fire region which is seismicall...
A series of earthquakes such as Sumatra-Andaman earthquake on 26 December 2004, Nias earthquake on 2...
Malaysia started to experience earthquake especially in Sabah and Sarawak compared to Peninsular Mal...
Located in active earthquake zone, all buildings in Indonesia should be designed to follow strict b...
A lot of building in Malaysia is not design according to code that specifies seismic provision since...
Before the disaster of the century known as ‘The Terrible Tsunami ’ caused by heavy Sumatra Andaman ...
Most of current Malaysian’s structures have not been designed for designs did not consider seismic e...
Most structures in Malaysia do not consider for seismic design during its service lifetime. However,...
Previously, damaging earthquakes were fortunately rare in Malaysia. However, after Sumatera-Andaman ...
The location of Malaysia is considered safe from seismic and not within the Pacific Ring of Fire but...
The purpose of this study was to investigate the effect of earthquake and wind loading on high rise ...
Buildings in Malaysia are usually designed and analysed without provisions and considerations for ea...
Normally in Malaysia, lateral force that is taken into consideration in design is wind load. Tremor...
Malaysia region is one of the areas with low seismic hazard, but with high consequence. Although, t...
In Malaysia, even though the country can be considered as a low seismic area, the structural safety ...
Malaysia is fortunate because it is located outside the Pacific Ring-Fire region which is seismicall...
A series of earthquakes such as Sumatra-Andaman earthquake on 26 December 2004, Nias earthquake on 2...
Malaysia started to experience earthquake especially in Sabah and Sarawak compared to Peninsular Mal...
Located in active earthquake zone, all buildings in Indonesia should be designed to follow strict b...
A lot of building in Malaysia is not design according to code that specifies seismic provision since...
Before the disaster of the century known as ‘The Terrible Tsunami ’ caused by heavy Sumatra Andaman ...
Most of current Malaysian’s structures have not been designed for designs did not consider seismic e...
Most structures in Malaysia do not consider for seismic design during its service lifetime. However,...
Previously, damaging earthquakes were fortunately rare in Malaysia. However, after Sumatera-Andaman ...
The location of Malaysia is considered safe from seismic and not within the Pacific Ring of Fire but...