Add to ORKGThe objective of this project is to further optimize the suspension system of a Formula SAE race car with steering system included. The suspension system is designed based on unequal length double wishbone suspension system. Several changes had been made for the new car with the usage of hybrid composite-spaced frame chassis and single cylinder engine
The chosen project is based on the redesign of the steering and suspension system for the University...
En el Perú, la construcción de autos destinados a la competencia ha sido siempre una práctica exenta...
The basic ability of a vehicle is to “run”, “turn” and “stop”. The safeness and comfort during a dri...
This report is prepared to describe the project of designing a suspension system for a small race ca...
For this MQP, a chassis and suspension for an SAE formula race car was designed and built. The new d...
The objective of this project is to further optimize the suspension system of a Formula SAE race ca...
The focus of the paper is on designing a suspension system for a medium downforce small Formula type...
Designing the first car for a Formula SAE team can be very challenging and confusing due to close in...
AbstractIn this article the design of the suspension of a sports car with the class “FORMULA SAE” is...
In an autocross/formula style racecar the suspension is the single most important part. Its function...
In this document it is presented the design of a new steering system for the IIT FSAE race car devel...
In this paper, the design process of a new chassis for a Formula SAE car is presented. The chassis i...
The purpose of this report is to investigate the design development and evaluate the structural and...
This master thesis concerns the design and analysis of the suspension for the Formula Student Team U...
The objective of this project was to design, manufacture, test and tune a performance oriented suspe...
The chosen project is based on the redesign of the steering and suspension system for the University...
En el Perú, la construcción de autos destinados a la competencia ha sido siempre una práctica exenta...
The basic ability of a vehicle is to “run”, “turn” and “stop”. The safeness and comfort during a dri...
This report is prepared to describe the project of designing a suspension system for a small race ca...
For this MQP, a chassis and suspension for an SAE formula race car was designed and built. The new d...
The objective of this project is to further optimize the suspension system of a Formula SAE race ca...
The focus of the paper is on designing a suspension system for a medium downforce small Formula type...
Designing the first car for a Formula SAE team can be very challenging and confusing due to close in...
AbstractIn this article the design of the suspension of a sports car with the class “FORMULA SAE” is...
In an autocross/formula style racecar the suspension is the single most important part. Its function...
In this document it is presented the design of a new steering system for the IIT FSAE race car devel...
In this paper, the design process of a new chassis for a Formula SAE car is presented. The chassis i...
The purpose of this report is to investigate the design development and evaluate the structural and...
This master thesis concerns the design and analysis of the suspension for the Formula Student Team U...
The objective of this project was to design, manufacture, test and tune a performance oriented suspe...
The chosen project is based on the redesign of the steering and suspension system for the University...
En el Perú, la construcción de autos destinados a la competencia ha sido siempre una práctica exenta...
The basic ability of a vehicle is to “run”, “turn” and “stop”. The safeness and comfort during a dri...