Biosorption of Cr (VI) by acid-modified based-waste fungal biomass from <i>Calocybe indica</i> fruiting bodies production

The world is going through a colossal drinking water scarcity. Unchecked discharge (even at trace levels) of Cr (VI) from industries into water bodies is a serious environmental concern. Here, we report waste fungal biomass (WFB) for the detoxification and removal of chromium ions. Biomass understudy was collected from Calocybe indica fruiting bodies. WFB was used after drying and pretreatment with two distinctive chemical methods, which improved the remediation effectiveness of Cr (VI). Light microscope and Field emission Scanning microscope (FESEM) were employed to elucidate the surface morphology of waste fungal biomass. While Fourier-Transform Infrared-Spectroscopy (FTIR) and Energy Dispersive X-Ray analysis (EDAX) were deployed to explore the mechanism of interaction between Cr (VI) anion and waste fungal biomass. X-ray Photoelectron Spectroscopy (XPS) analyses demonstrated considerable conversion of Cr (VI) into nontoxic Cr (III) species. The most favorable condition for optimum Cr (VI) remediation of 99.66% by treated waste fungal biomass (TWFB) occurred at pH 3, contact time 10 min, adsorbent dosage 3 gL−1, Cr (VI) concentration 4 mgL−1, stirring speed 140 rpm, and temperature 320 K, where for untreated waste fungal biomass (UWFB) the optimum of 85% remediation occurred at a contact time 15 min, and adsorbent dosage 2 gL−1 whereas other experimental conditions remained identical as TWFB biosorbent. Pseudo-second-order kinetics (R2 > 0.99) model matched the adsorption rate. And, the Freundlich isotherm model (R2 > 0.99) is shown to be a better match for the experimental data. The optimum amount of Cr (VI) adsorbed by the TWFB and UWFB were 205.8 ± 10.1 and 72.85 ± 2.36 mgg−1, respectively. Thermodynamic parameters revealed that the adsorption was spontaneous (ΔG ˂ 0), endothermic (ΔH > 0), and entropy-driven (ΔS > 0). The generated WFB adsorbent also has significant recycling potential. After five cycles of regeneration and adsorption. It can still keep up good remediation effectiveness of Cr (VI) ions to 85.5% Waste biomaterials of mushroom origin are interesting for their application in the adsorption and removal of toxic heavy metals from wastewater. In the current study, the synthesized biosorbent is mainly composed of casing soil and substrate on which C. indica fruiting bodies grow. The casing soil consists of peat with various tiny and large pores and also has rich functionality for capturing metal ions, a crucial advantage of our sorbent over the reported biosorbent materials.