Plunging Breakers - Part 1. Analysis of an Ensemble of Wave Profiles

An experimental study of the dynamics and droplet production in three mechanically generated plunging breaking waves is presented in this two-part paper. In the present paper (Part 1), the dynamics of the three breakers are studied through measurements of the evolution of their free surface profiles during 10 repeated breaking events for each wave. The waves are created from dispersively focused wave packets which are generated by a highly accurate programmable wave maker. The wave maker motions that create the three breakers differ primarily only by small changes in their overall amplitude. Breaker profiles are measured with a cinematic laser induced fluorescence technique covering a streamwise region of approximately one breaker wavelength and over a time of 2.6 breaker periods. The 10 repeated sets of breaker profiles are spatially and temporally aligned to the location and time of jet impact. The aligned profile data is used to create spatio-temporal maps of the ensemble average surface height and the standard deviation of both the local normal distance and the local arc length relative to the instantaneous mean profile. It is found that the mean and standard deviation maps contain strongly correlated localized features and indicate that the transition from laminar to turbulent flow is a highly repeatable process. Regions of high standard deviation include the splash created by the plunging jet impact and subsequent splash impacts at the front of the breaking region as well as the site where the air pocket entrained under the plunging jet at the moment of jet tip impact comes to the surface and pops on the back face of the wave. In Part 2, these features are used to interpret various features of the distributions of droplet number, diameter and velocity